Author Topic: Fastback/sportroof rear seat cushion "piano wire" question  (Read 2403 times)

Offline cob428

  • Full Member
  • ***
  • Posts: 186
Fastback/sportroof rear seat cushion "piano wire" question
« on: July 12, 2023, 05:54:16 PM »
Does anyone have a picture of the burlap in the rear seat with the wire that runs through the burlap? I have seen a lot of front seats but nothing for rear?

Pete
« Last Edit: September 02, 2023, 10:55:45 PM by J_Speegle »
Concourse Wantabe
69 GT 500 Built Dearborn 06/69
A/C, Auto,
69 Mach 1 Metuchen 11/68
A/C, Auto 351 W
2009 Supersnake

Offline Bossbill

  • Hero Member
  • *****
  • Posts: 3283
  • In the middle of project hell
Re: "piano wire" rear seat
« Reply #1 on: July 12, 2023, 07:15:13 PM »
Not a 69 like your car of interest but a 67 rear back of seat.

I left it large so you drill in on the wires.
Bill
Concours  Actual Ford Build 3/2/67 GT350 01375
Driven      6/6/70 0T02G160xxx Boss 302
Modified   5/18/65 5F09A728xxx Boss 347 Terminator-X 8-Stack
Race        65 2+2 Coupe conversion

Offline cob428

  • Full Member
  • ***
  • Posts: 186
Re: "piano wire" rear seat
« Reply #2 on: July 13, 2023, 06:09:27 PM »
thank you, does anyone know if the upper seat back for a fold down have the "piano wire" and the burlap originally?

Pete
Concourse Wantabe
69 GT 500 Built Dearborn 06/69
A/C, Auto,
69 Mach 1 Metuchen 11/68
A/C, Auto 351 W
2009 Supersnake

Offline J_Speegle

  • Administrator
  • Hero Member
  • *****
  • Posts: 24620
Re: "piano wire" rear seat
« Reply #3 on: July 15, 2023, 06:21:11 PM »
Does anyone have a picture of the burlap in the rear seat with the wire that runs through the burlap? I have seen a lot of front seats but nothing for rear?

Pete


Don't believe or recall ever seeing these used on the thin and narrow upper cushion on a 67=70 fold down seat section
Jeff Speegle

Anything worth doing is worth doing concours ;)

Offline Bossbill

  • Hero Member
  • *****
  • Posts: 3283
  • In the middle of project hell
Re: "piano wire" rear seat
« Reply #4 on: July 15, 2023, 09:49:05 PM »
The upper seat back (the flat one) on the fold down does not have the burlap and wire (on a 65-67). It has a 3/4x3/4 (approx -- I'll measure tomorrow) square mesh.
I'll check the 65 out to see what it has tomorrow.
« Last Edit: July 17, 2023, 04:47:34 PM by Bossbill »
Bill
Concours  Actual Ford Build 3/2/67 GT350 01375
Driven      6/6/70 0T02G160xxx Boss 302
Modified   5/18/65 5F09A728xxx Boss 347 Terminator-X 8-Stack
Race        65 2+2 Coupe conversion

Offline Bossbill

  • Hero Member
  • *****
  • Posts: 3283
  • In the middle of project hell
Re: "piano wire" rear seat
« Reply #5 on: July 17, 2023, 02:22:14 PM »
I pulled out my 65 Fold-down seat and see it still has the part number on the back side of the seat (the flat seat part).

The mesh is 0.5x0.5 center to center of the wire mesh. It's approx 0.040 thick.
The padding is actually foam. This matches what's on my 67 as well. My 70 does not have a fold-down.

The seat bottom has the burlap with wire.

(added the term fold-down on my last two
posts for clarity)
« Last Edit: July 17, 2023, 04:49:16 PM by Bossbill »
Bill
Concours  Actual Ford Build 3/2/67 GT350 01375
Driven      6/6/70 0T02G160xxx Boss 302
Modified   5/18/65 5F09A728xxx Boss 347 Terminator-X 8-Stack
Race        65 2+2 Coupe conversion

Offline J_Speegle

  • Administrator
  • Hero Member
  • *****
  • Posts: 24620
Re: "piano wire" rear seat
« Reply #6 on: July 17, 2023, 06:51:38 PM »
I pulled out my 65 Fold-down seat and see it still has the part number on the back side of the seat (the flat seat part).

The mesh is 0.5x0.5 center to center of the wire mesh. It's approx 0.040 thick.
The padding is actually foam. This matches what's on my 67 as well. My 70 does not have a fold-down.


Thanks for saving me the time to post basically the same picture from other years. Exactly what I've seen up to at least 70 models
Jeff Speegle

Anything worth doing is worth doing concours ;)

Offline cob428

  • Full Member
  • ***
  • Posts: 186
Re: "piano wire" rear seat
« Reply #7 on: July 21, 2023, 11:20:26 AM »
Thank you for your help on this.

Pete
Concourse Wantabe
69 GT 500 Built Dearborn 06/69
A/C, Auto,
69 Mach 1 Metuchen 11/68
A/C, Auto 351 W
2009 Supersnake

Offline cob428

  • Full Member
  • ***
  • Posts: 186
Re: "piano wire" rear seat
« Reply #8 on: August 01, 2023, 09:37:55 AM »
Was there a Batting material between the seat foam and the cover.
Pete
Concourse Wantabe
69 GT 500 Built Dearborn 06/69
A/C, Auto,
69 Mach 1 Metuchen 11/68
A/C, Auto 351 W
2009 Supersnake

Offline J_Speegle

  • Administrator
  • Hero Member
  • *****
  • Posts: 24620
Re: "piano wire" rear seat
« Reply #9 on: August 01, 2023, 05:22:15 PM »
Was there a Batting material between the seat foam and the cover.
Pete

Don't believe there was on the upper cushion. Bottom seat section did
Jeff Speegle

Anything worth doing is worth doing concours ;)