Author Topic: 65 Dearborn VR suppressor location  (Read 891 times)

Offline rtate

  • Jr. Member
  • **
  • Posts: 62
65 Dearborn VR suppressor location
« on: January 07, 2020, 12:29:00 PM »
I have a December 64 built Dearborn  convertible (with power roof, don't know if that makes a difference )
I would like to add the noise suppressor at the VR but don't know the exact location.

Does anyone have a photo that I could use ?

Thanks
« Last Edit: January 07, 2020, 05:09:36 PM by rtate »
December 10/64 Dearborn K code, Convertible
Silver Smoke Gray

Offline J_Speegle

  • Administrator
  • Hero Member
  • *****
  • Posts: 24578
Re: 66 Dearborn VR suppressor location
« Reply #1 on: January 07, 2020, 03:11:58 PM »
I have a December 65 Dearborn convertible (with power roof, don't know if that makes a difference )
I would like to add the noise suppressor at the VR but don't know the exact location.

Does anyone have a photo that I could use ?

Sorry I could not find a clear picture taken from under the area/voltage regulator for that year and plant

It was mounted to the bottom mounting screw and faced towards the outside/drivers side/plug side of the car

Picture barely shows the wire leading to it below

Jeff Speegle

Anything worth doing is worth doing concours ;)

Offline rtate

  • Jr. Member
  • **
  • Posts: 62
Re: 66 Dearborn VR suppressor location
« Reply #2 on: January 07, 2020, 03:57:07 PM »
Thanks Jeff !
I was hoping that it would be in a more visible location so I could show of my shiny new part   :)
And the new tag !
December 10/64 Dearborn K code, Convertible
Silver Smoke Gray

Offline J_Speegle

  • Administrator
  • Hero Member
  • *****
  • Posts: 24578
Re: 65 Dearborn VR suppressor location
« Reply #3 on: January 07, 2020, 05:01:20 PM »
Remember two staples in the tag :)
Jeff Speegle

Anything worth doing is worth doing concours ;)

Offline rtate

  • Jr. Member
  • **
  • Posts: 62
Re: 65 Dearborn VR suppressor location
« Reply #4 on: January 07, 2020, 05:03:51 PM »
Thanks
I have ordered the tag and suppressors from Virginia Classics , will it have the staples in place ?
December 10/64 Dearborn K code, Convertible
Silver Smoke Gray

Offline J_Speegle

  • Administrator
  • Hero Member
  • *****
  • Posts: 24578
Re: 65 Dearborn VR suppressor location
« Reply #5 on: January 07, 2020, 05:26:19 PM »
Thanks
I have ordered the tag and suppressors from Virginia Classics , will it have the staples in place ?

Don't know since I've not ordered one. Not sure if the one closest to the fold (if in place) would allow it to be slipped over the plug at the end with ease but you will have to check when it gets there.

« Last Edit: January 07, 2020, 05:44:22 PM by J_Speegle »
Jeff Speegle

Anything worth doing is worth doing concours ;)

Offline dkknab

  • Hero Member
  • *****
  • Posts: 734
Re: 65 Dearborn VR suppressor location
« Reply #6 on: September 06, 2022, 04:13:55 PM »
Thanks
I have ordered the tag and suppressors from Virginia Classics , will it have the staples in place ?

I'm assuming by now you received the red tag and installed it.  Would you be able to post a picture of what you ended up doing please? I need that tag too but am not sure how it gets stapled in place from the earlier picture. It does look like the tag is folded in half them stapled near the wire I believe.
David Knab

1968 Sunlit Gold Coupe Sprint B
289 2V, AT, PS
Nugget Gold Interior
April 5, 1968 Build Date, Metuchen Plant

2019 Bullitt Highland Green K7662

Offline J_Speegle

  • Administrator
  • Hero Member
  • *****
  • Posts: 24578
Re: 65 Dearborn VR suppressor location
« Reply #7 on: September 06, 2022, 06:57:19 PM »
I'm assuming by now you received the red tag and installed it.  Would you be able to post a picture of what you ended up doing please? I need that tag too but am not sure how it gets stapled in place from the earlier picture. It does look like the tag is folded in half them stapled near the wire I believe.

Its stapled very close to the wire to keep if from slipping around and at the end (minus maybe 1/8" -1/4" ) from the very end to hold the ends together and make the print easier to see

Will look for a better picture to post
« Last Edit: September 06, 2022, 08:05:39 PM by J_Speegle »
Jeff Speegle

Anything worth doing is worth doing concours ;)

Offline J_Speegle

  • Administrator
  • Hero Member
  • *****
  • Posts: 24578
Re: 65 Dearborn VR suppressor location
« Reply #8 on: September 06, 2022, 08:06:13 PM »
Examples of staple location and direction of staple installation

Hope this helps


Jeff Speegle

Anything worth doing is worth doing concours ;)