Author Topic: Under Door Sill Plate Wire Retainers  (Read 510 times)

Offline rockhouse66

  • Hero Member
  • *****
  • Posts: 946
Under Door Sill Plate Wire Retainers
« on: August 22, 2022, 08:55:35 PM »
NOTE: This post was separated from another thread so that a discussion could follow without disturbing an ongoing wanted request. Will expand and move again if this starts to expand outside of a single (66) year discussion

Interesting.  My 9/65 San Jose 1966 car has these, and I understood they were a 1965 detail and that the 1966 cars had tape holding down the harness.  My car also had 1965 SS wheels, both of which I assumed were just carryover details from 1965.  So what cars really got these and what cars did not?



« Last Edit: August 23, 2022, 12:18:02 AM by J_Speegle »
Jim
'66 GT FB

Offline J_Speegle

  • Administrator
  • Hero Member
  • *****
  • Posts: 24620
Re: Under Door Sill Plate Wire Retainers
« Reply #1 on: August 22, 2022, 09:23:12 PM »
Interesting.  My 9/65 San Jose 1966 car has these, and I understood they were a 1965 detail and that the 1966 cars had tape holding down the harness.  My car also had 1965 SS wheels, both of which I assumed were just carryover details from 1965.  So what cars really got these and what cars did not?

Going to move this post so that we can get in an area for discussion and away from a Wanted ad  ;)
« Last Edit: August 23, 2022, 12:18:09 AM by J_Speegle »
Jeff Speegle

Anything worth doing is worth doing concours ;)

Offline Bossbill

  • Hero Member
  • *****
  • Posts: 3283
  • In the middle of project hell
Re: Under Door Sill Plate Wire Retainers
« Reply #2 on: August 22, 2022, 09:32:52 PM »
Jeff -- and the pic of the fastener in side view.
« Last Edit: August 23, 2022, 12:18:18 AM by J_Speegle »
Bill
Concours  Actual Ford Build 3/2/67 GT350 01375
Driven      6/6/70 0T02G160xxx Boss 302
Modified   5/18/65 5F09A728xxx Boss 347 Terminator-X 8-Stack
Race        65 2+2 Coupe conversion

Offline J_Speegle

  • Administrator
  • Hero Member
  • *****
  • Posts: 24620
Re: Under Door Sill Plate Wire Retainers
« Reply #3 on: August 23, 2022, 12:16:58 AM »
From the original wanted thread

Picture of a side view of the clips




And a MPC graphic of the piece that John posted

Jeff Speegle

Anything worth doing is worth doing concours ;)

Offline CharlesTurner

  • Charles Turner
  • Administrator
  • Hero Member
  • *****
  • Posts: 7687
Re: Under Door Sill Plate Wire Retainers
« Reply #4 on: August 23, 2022, 01:15:23 AM »
Interesting.  My 9/65 San Jose 1966 car has these, and I understood they were a 1965 detail and that the 1966 cars had tape holding down the harness.  My car also had 1965 SS wheels, both of which I assumed were just carryover details from 1965.  So what cars really got these and what cars did not?


Jim: I have found the clips used on 65-66 and also cloth tape applied over the top.  Thought I had seen them on 67-68, but all these cars seem to blend together!
Charles Turner - MCA/SAAC Judge
Concours Mustang Forum Admin