« previous next »
Pages: [1]   Go Down

Author Topic: Temp sender  (Read 1411 times)

Offline Beeler422

  • Newbie
  • *
  • Posts: 21
Temp sender
« on: May 16, 2022, 02:58:59 AM »
On a gt350, where is the temp sender located on the replacement intake and how is it wired? Anyone have a picture and part number of an original?  Mine was modified at some point in the past.

Also, without starting another thread, does anyone restore shift knobs or have any tips?  The chrome under the clear epoxy needs refinishing on mine.

Thanks.
« Last Edit: May 16, 2022, 03:07:40 AM by Beeler422 »
Logged

Offline ruppstang

  • Hero Member
  • *****
  • Posts: 3936
Re: Temp sender
« Reply #1 on: May 16, 2022, 08:42:23 AM »
It is located just behind the T-stat housing, same as the cast iron intake. The wire is in the engine harness which includes the oil pressure sender, coil power and the temperature sender. 
Logged

Offline J_Speegle

  • Administrator
  • Hero Member
  • *****
  • Posts: 24620
Re: Temp sender
« Reply #2 on: May 16, 2022, 05:00:47 PM »
Top row with cast iron intake and bottom row with the aluminum

Water temp senders would have not been painted over like shown in the upper left. Just some owner with a rattle can  ::)



« Last Edit: May 16, 2022, 05:14:20 PM by J_Speegle »
Logged
Jeff Speegle

Anything worth doing is worth doing concours ;)

Offline Beeler422

  • Newbie
  • *
  • Posts: 21
Re: Temp sender
« Reply #3 on: May 16, 2022, 05:20:51 PM »
Quote from: J_Speegle on May 16, 2022, 05:00:47 PM
Top row with cast iron intake and bottom row with the aluminum

Water temp senders would have not been painted over like shown in the upper left. Just some owner with a rattle can  ::)



Awesome. Thanks.  What is just to the left of the sender in the bottom 2 pictures?  That is where my sender currently.
Logged

Offline Bob Gaines

  • Global Moderator
  • Hero Member
  • ****
  • Posts: 9360
Re: Temp sender
« Reply #4 on: May 16, 2022, 05:24:54 PM »
Quote from: Beeler422 on May 16, 2022, 05:20:51 PM
Awesome. Thanks.  What is just to the left of the sender in the bottom 2 pictures?  That is where my sender currently.
That first threaded hole left of the sender in the pictures is where the heater hose fitting goes .
Logged
Bob Gaines,Shelby enthusiast, Shelby collector , Shelby concours judge SAAC,MCA,Mid America Shelby

Offline Beeler422

  • Newbie
  • *
  • Posts: 21
Re: Temp sender
« Reply #5 on: May 16, 2022, 09:57:33 PM »
Got it.  I see what's been done.  Thanks!
Logged
Pages: [1]   Go Up
« previous next »