Author Topic: '66 Rally Pac tach face  (Read 3043 times)

Offline gjz30075

  • Full Member
  • ***
  • Posts: 210
'66 Rally Pac tach face
« on: October 05, 2009, 11:45:59 AM »
Hi all,
I'm wanting to fit a proper rally pac to my '66 GT (Oct '65 SJ build).   I understand from an early previous owner that the car came with one but it's long gone now.    I have seen presumably originals, with the 'Ford' at the bottom of the tach face, with tach increments in either tens or fives, ie, the numbers on the tach face are either 0, 5, 10, 15, 20, etc, or 0, 10, 20, 30 etc , all the way to 6k.    I've seen both types on 8 cyl cars but the owners retro fitted them and couldn't really answer the question.
Any help is appreciated.
Thanks!

Greg Z
Greg Z

Offline gjz30075

  • Full Member
  • ***
  • Posts: 210
Re: '66 Rally Pac tach face
« Reply #1 on: October 05, 2009, 02:41:25 PM »
Here's an example of what I mean:




Note the differences with the increments in the tach face.
Greg Z

Offline outlawincorporated

  • Kangaroo Herder
  • Hero Member
  • *****
  • Posts: 530
Re: '66 Rally Pac tach face
« Reply #2 on: October 06, 2009, 03:35:51 AM »
All of my unrestored 66 cars that have had rally pacs from factory all have the 500 rpm increments on the raly pacs.  seem to remember there was a discussion on another forum about this and i think the voice of reason was that both are acceptable.

im sure there will be others who may have a opinion on this.

p.s for what its worth i prefer the 500 rpm version over the 1000 rpm style.

regards.

PHILL  BERESFORD.
MELBOURNE.
AUSTRALIA

« Last Edit: October 06, 2009, 03:37:40 AM by outlawincorporated »
ITS ONLY EVER ORIGINAL ONCE!!!!!

MCA GOLD CARD JUDGE 1ST GENERATION.  MCA #68589

Offline gjz30075

  • Full Member
  • ***
  • Posts: 210
Re: '66 Rally Pac tach face
« Reply #3 on: October 07, 2009, 11:55:53 AM »
Thanks Phil.
Greg Z