Author Topic: Original 1970 Mustang PS tie rods for restoration  (Read 425 times)

Offline Hipo giddyup

  • Hero Member
  • *****
  • Posts: 1207
  • There is no end to doing right. Giddyup!!!
Original 1970 Mustang PS tie rods for restoration
« on: April 28, 2021, 05:20:56 PM »
This is a set of 1970 PS tie rods from my son's Mach 1. They have the correct B stamping on the bottom of the tie rods and still have the D0OA and D0DA boots. They are still tight with no slop. Tie rods have typical pitting from age and the rubber dust boots will need replaced. They were already media blasted with the boots and joints taped up to prevent media contamination.
 Still attached are the original adjusting sleeves which have the original R/S/C bolt head markings.

Asking $150 for all with buyer paying for actual shipping. Payment by PayPal friends and family or Venmo.
« Last Edit: April 28, 2021, 08:42:13 PM by J_Speegle »
1967 Springtime Yellow Coupe, 289 2v 3spd, Metuchen built, Nov. 17th 66'
1966 Sahara Beige Coupe, 289 2v 3spd, Dearborn built, July 21st 66'
1964 1/2 Pagoda Green Coupe, 260 2v 3spd, Dearborn built, June 30th 64'
1966 GT350 Fastback clone, 289 HiPo, 725cfm Holley, 4spd, SanJose built, Nov 25th 65'

Offline Hipo giddyup

  • Hero Member
  • *****
  • Posts: 1207
  • There is no end to doing right. Giddyup!!!
Re: Original 1970 Mustang PS tie rods for restoration
« Reply #1 on: May 15, 2021, 10:40:06 PM »
Price drop, asking $100 with buyer to pay actual shipping..
1967 Springtime Yellow Coupe, 289 2v 3spd, Metuchen built, Nov. 17th 66'
1966 Sahara Beige Coupe, 289 2v 3spd, Dearborn built, July 21st 66'
1964 1/2 Pagoda Green Coupe, 260 2v 3spd, Dearborn built, June 30th 64'
1966 GT350 Fastback clone, 289 HiPo, 725cfm Holley, 4spd, SanJose built, Nov 25th 65'