Author Topic: Vacuum Advance  (Read 2382 times)

Offline Brian Conway

  • Hero Member
  • *****
  • Posts: 1623
Re: Vacuum Advance
« Reply #15 on: December 03, 2020, 07:50:02 PM »
Good to hear from you Tim. Brian
5RO9A GT  4 Spd Built 5/29/65
9TO2R SCJ 4 Spd Built 9/19/68
Owner Driver Mechanic
San Diego, Ca.

Offline jwc66k

  • Hero Member
  • *****
  • Posts: 7317
Re: Vacuum Advance
« Reply #16 on: December 03, 2020, 08:35:07 PM »
The C5AZ 12370 A services both metal line and rubber hose(nipple) as the parts are swapped into the service housing. ( 66/up only,pre 65 used a different part B9AF )I will be re-entering the distributor restoration very soon,but service will be a bit slow. ( I lost 50% of my help )Thanks for kind words. Tim O’Connor
You might want to check your numbers. From what I have, and what I see in Ford Car Parts (aka the MPC), the distributor used on 65 and 66 Mustang 289 "A" code engines (non-smog) was a C5GF-12127-A (as marked, C5GY-12127-A service), which used a C5AZ-12370-A diaphragm.
Jim
I promise to be politically correct in all my posts to keep the BBBB from vociferating.