Topic: Distributor hold down and bolt, painted or bare? 69 GT350

[Steve.chatman]

Distributor hold down and bolt, painted or bare? 69 GT350

[Bob Gaines]

Distributor hold down and bolt, painted or bare? 69 GT350

Neather . S7

[Steve.chatman]

I’m sorry but I’m not familiar with what S7 means.     

[J_Speegle]

I’m sorry but I’m not familiar with what S7 means.     

Look in the Library section - title of the thread/post is - FINISH CODES, Short List -

Kindly posted by or member - jwc66k

S7 = Cad plating

[Steve.chatman]

So the hold down and the bolt are Cad Plated? A replacement from NPD shows a cad plated bolt but the Hold down appears to be a natural steel. Somehow my originals disappeared during two moves.  I would post pictures but I can’t get the pictures to down load.

[Bob Gaines]

So the hold down and the bolt are Cad Plated? A replacement from NPD shows a cad plated bolt but the Hold down appears to be a natural steel. Somehow my originals disappeared during two moves.  I would post pictures but I can’t get the pictures to down load.

Hold down is bare cast and bolt is plated.

[Steve.chatman]

Thanks Bob

[shelbymann1970]

I’m sorry but I’m not familiar with what S7 means.     

A must have book is AMK's guide to Ford fasteners". Has just about everything you need to know. I pretty much have memorized the codes over the years. I got one of the first books when Max started making them decades ago. Gary 
https://www.amkproducts.com/parts/ford/guide-to-fasteners/  . I'm sure  the companies who support this forum can get you the book also.