« previous next »
Pages: [1]   Go Down

Author Topic: Pot-Metal adhesive?  (Read 3171 times)

Offline Angela

  • Hero Member
  • *****
  • Posts: 836
Pot-Metal adhesive?
« on: October 25, 2020, 06:43:53 PM »
Hey guys, what do you recommend for adhesives which will adhere to the pot-metal used in the quarter panel end caps or headlight buckets?

I frequently see cracks in the lower section of 69/70 quarter panel end caps. I see similar cracks in the 67/68 headlight buckets where the valance connects.

I've thought about using 3M 2-part structural adhesive but I thought I'd ask for recommendations first.

Thanks.
Logged

Offline 67gtasanjose

  • Hero Member
  • *****
  • Posts: 5091
  • "Take the MUSTANG PLEDGE"
Re: Pot-Metal adhesive?
« Reply #1 on: October 26, 2020, 04:40:06 AM »
Muggy Weld is a brand of solder that works very well.
Logged
Richard Urch

1967 (11/2/66, S.J.) GTA Luxury Coupe, 289-4V w/Thermactor Emissions, C-4, Int./Ext. Decor +many options

2005 (04/05) GT Premium Convertible, Windveil Blue, Parchment Top w/Med. Parchment interior,  Roush Body Appointments

Offline BKnapp

  • Full Member
  • ***
  • Posts: 237
Re: Pot-Metal adhesive?
« Reply #2 on: October 26, 2020, 08:37:58 AM »
Logged
Bill

‘67 390 Coupe A/T  P/S  P/B. (Built 1/4/1967)  7R01S145xxx
‘67 390 FB A/T P/S P/B (Built 3/10/1967) 7F02S173xxx
2007 Shelby GT500 40th Anniv.  Convert. #125

Offline 67gta289

  • Hero Member
  • *****
  • Posts: 3080
Re: Pot-Metal adhesive?
« Reply #3 on: October 26, 2020, 09:20:46 AM »
An alternative to adhesive, admittedly straying from the request, is to use a very low temperature electrode and a TIG welder.  Fortunately I have a good friend that is an expert in this area and he can do wonders, including rebuilding busted off "studs" on a 67 lower back panel grille.
Logged
John
67 289 GTA Dec 20 1966 San Jose
7R02C156xxx
MCA 74660

Offline Coralsnake

  • Global Moderator
  • Hero Member
  • ****
  • Posts: 931
Re: Pot-Metal adhesive?
« Reply #4 on: October 26, 2020, 10:03:55 AM »
Does anyone have a muggy meld repair service? It looks great, but never seemed to work for me?

This guy can do wonders:  potmetal.repair/about-james-ruther/

I was very satisfied with his work repairing carburetor air horns.
Logged

Offline ExportMach

  • Full Member
  • ***
  • Posts: 247
Re: Pot-Metal adhesive?
« Reply #5 on: October 26, 2020, 01:34:48 PM »
One of my head light buckets had a broken tab, I found a repair kit that used J-B Weld. It was simple and effective.
Logged
Mark C
Ford T5 registrar www.FordT5.com
MCA certified judge - '69-'70 concours
1970 Mach 1 T-5; bucked Mar 1970
0F05H172XXX; 63C, 6, 3A, 91, 6, 1

Offline jwc66k

  • Hero Member
  • *****
  • Posts: 7341
Re: Pot-Metal adhesive?
« Reply #6 on: October 26, 2020, 02:03:57 PM »
Quote from: ExportMach on October 26, 2020, 01:34:48 PM
One of my head light buckets had a broken tab, I found a repair kit that used J-B Weld. It was simple and effective.
I've repaired several 64-66 headlight buckets with the JB Weld kits. No problems at all. JB Weld is not a fix all product, but it is good on non stress metal applications.
Jim
Logged
I promise to be politically correct in all my posts to keep the BBBB from vociferating.

Offline 67gtasanjose

  • Hero Member
  • *****
  • Posts: 5091
  • "Take the MUSTANG PLEDGE"
Re: Pot-Metal adhesive?
« Reply #7 on: October 26, 2020, 02:18:17 PM »
Quote from: 67gtasanjose on October 26, 2020, 04:40:06 AM
Muggy Weld is a brand of solder that works very well.
Quote from: Coralsnake on October 26, 2020, 10:03:55 AM
Does anyone have a muggy meld repair service? It looks great, but never seemed to work for me?

This guy can do wonders:  potmetal.repair/about-james-ruther/

I was very satisfied with his work repairing carburetor air horns.

Using a wetted wood backing, I filled the missing portion in, following the YouTube videos I saw 4 or 5 years ago.
I didn't quite get enough "fill" the first time up but round two was good. Sanded off the front and back sides, drilled out the hole. It held on final assembly too.

I am not a welder by trade. It can be done by anyone.
Logged
Richard Urch

1967 (11/2/66, S.J.) GTA Luxury Coupe, 289-4V w/Thermactor Emissions, C-4, Int./Ext. Decor +many options

2005 (04/05) GT Premium Convertible, Windveil Blue, Parchment Top w/Med. Parchment interior,  Roush Body Appointments

Offline Coralsnake

  • Global Moderator
  • Hero Member
  • ****
  • Posts: 931
Re: Pot-Metal adhesive?
« Reply #8 on: October 26, 2020, 08:28:17 PM »
Excellent results!
Logged
Pages: [1]   Go Up
« previous next »