Author Topic: Additional rad top mount screws - does your 70 Boss 302 have these  (Read 2475 times)

Offline boss167961

  • Newbie
  • *
  • Posts: 46
I note that Jack Brooks - the lovely guy who is Mr Dead Nuts On - has a pair of bolts in his stock list that are ?additional? top mounted screws to secure the rad top mount plate to the rad support panel. See words and pics on Jack?s site at the following link https://www.deadnutson.com/upper-radiator-support-screws-2/

Do any or your cars have these screws? I am partic interested in late build 70 Metuchen cars like mine.
As ever, thanks for your time guys
Martin

Offline RoyceP

  • Hero Member
  • *****
  • Posts: 1536
Re: Additional rad top mount screws - does your 70 Boss 302 have these
« Reply #1 on: July 11, 2021, 11:06:37 AM »
Mine didn't but the holes were there. Jack doesn't sell stuff without researching it thoroughly.
1968 W code 427 Cougar XR-7 GTE Feb 23 Dearborn C6 / 3.50 open
1968 R code 428CJ Cougar XR-7 May 13 Dearborn C6 / 3.91 T - Lock

Offline Bob Gaines

  • Global Moderator
  • Hero Member
  • ****
  • Posts: 9369
Re: Additional rad top mount screws - does your 70 Boss 302 have these
« Reply #2 on: July 11, 2021, 12:23:27 PM »
Not all 69/70 cars got them as Jack's application description seems to imply. I am not sure why. I have seen many unmolested survivor type cars with BB with and without air etc. that didn't have the screws and no holes. If it had the holes it would definitely have had the lag screws installed at one time. If no holes then of course it didn't get any.It will be interesting to get a read on if a BOSS thing or not.
« Last Edit: July 12, 2021, 04:59:41 PM by Bob Gaines »
Bob Gaines,Shelby enthusiast, Shelby collector , Shelby concours judge SAAC,MCA,Mid America Shelby

Offline Bossbill

  • Hero Member
  • *****
  • Posts: 3283
  • In the middle of project hell
Re: Additional rad top mount screws - does your 70 Boss 302 have these
« Reply #3 on: July 11, 2021, 05:30:15 PM »
Is this post for 70 Boss or all 70 Mustangs? If the former, it's in the wrong place.

My signature Boss has the holes in the bracket but nothing in the front core support.
I don't believe the front is unmolested judging by the hood when we stripped it.
Bill
Concours  Actual Ford Build 3/2/67 GT350 01375
Driven      6/6/70 0T02G160xxx Boss 302
Modified   5/18/65 5F09A728xxx Boss 347 Terminator-X 8-Stack
Race        65 2+2 Coupe conversion

Offline J_Speegle

  • Administrator
  • Hero Member
  • *****
  • Posts: 24632
Re: Additional rad top mount screws - does your 70 Boss 302 have these
« Reply #4 on: July 12, 2021, 04:53:25 PM »
Is this post for 70 Boss or all 70 Mustangs? If the former, it's in the wrong place.

Moved the thread to the appropriate location if we're focusing on Boss only.

Also I think that comparing NJ and Dearborn built cars will only muddy the waters and make any research or conclusions useless.

If this develops into something that was done during specific periods of time during 70 production I think including other NJ built cars would increase the sample. Will let the OP decide and we'll adjust titles and location so we can investigate
Jeff Speegle

Anything worth doing is worth doing concours ;)