Topic: WTB Radio Bezel Center Console 1967

[Ralf]

Hello,
Looking for such a part.
Condition can be all grades.
However, the radio fixing domes behind the bezel have to be fully intact (no cut offs). > pic 3 marked red

2 Options possible
a) complete part pic 1
b) only rear frame pic 2 (only as an example)



Thx
Ralf

[67gtasanjose]

Picture #2 is incorrect for your Mustang.

[Ralf]

Picture #2 is incorrect for your Mustang.

Its only meant as an example in that sense that just a frame would be sufficient enough as well.

[67gtasanjose]

Its only meant as an example in that sense that just a frame would be sufficient enough as well.

Picture 1 is correct
Picture 3 is correct

Picture 2 is for a 68 Mustang or a 67 or 68 XR7 Cougar (not 100% sure on what is in picture 2) but a 67 Mustang does not ever use what is pictured UNLESS you use the complete PADDED console that goes with it and then, it wouldn't be anything originally found in a 67 Mustang.

Always your choice if you think I could be misleading you.

[Ralf]

Always your choice if you think I could be misleading you.

No, you're absolutely correct.

What I mean is the 67 Radio Bezel is made out of two frames (front and rear) and can be mechanically separated (I did not find a 67 pic were it is separated, so therefore I used a 68 just for demonstration). If someone has only the rear, which includes the both radio fixing domes (this is what matters to me),  that would be ok for me as well. I do not need the complete part. But of course, if someone has it as a complete part, I would take it.

Hope this is clear now.

[Ralf]

Anyone able to buy for me (seller only ships domestic)?
If so, pls pn.
Thx

[rustbucket]

Ralf, i have a few
I will go to storage tomorrow and get some pics and send you a PM

[Ralf]

Anyone able to buy for me (seller only ships domestic)?
If so, pls pn.
Thx

A BIG hand to John (67gta289). He helped me to manage getting the deal done! Great stuff.

@ rust
Thx for your help as well.


Ralf