Author Topic: Original 65-66 Jack Instruction label?  (Read 838 times)

Offline 21.04

  • Full Member
  • ***
  • Posts: 246
Original 65-66 Jack Instruction label?
« on: October 23, 2019, 03:43:10 PM »
I ran across a '66 SJ plant convertible that I am considering to purchase.  Its  a fairly low mileage c code car with original uncut sheet metal.  Jan '66 projected build.  I'm trying to inspect the parts and details that are there to see what has been replaced and what has not.  Can anyone tell the difference between an original jack instruction label vs a repro?  I've attached a photo of the label on the car.  it looks a little new, but most of the wiring and other parts on the car are pristine, including the original red deluxe interior. 

Matt
66 K code Conv GT red/red deluxe 4 spd
66 A code Conv Non-GT black/red deluxe 3 spd
66 Sprint Conv Unrestored Green/blk std 3 spd

Offline jwc66k

  • Hero Member
  • *****
  • Posts: 7351
Re: Original 65-66 Jack Instruction label?
« Reply #1 on: October 23, 2019, 04:34:26 PM »
If it's a repro, that would be an indication that the trunk lid was replaced and/or repainted, so do you see any indications that the lid was touched?
Jim
I promise to be politically correct in all my posts to keep the BBBB from vociferating.

Offline J_Speegle

  • Administrator
  • Hero Member
  • *****
  • Posts: 24632
Re: Original 65-66 Jack Instruction label?
« Reply #2 on: October 23, 2019, 06:46:30 PM »
There were a couple of different versions of the original jack instructions installed during 66 production. Looking at other San Jose examples with projected build dates on Jan the -C version is what I'm finding on unrestored cars.

Now comparing the stickers most of the difference is in the art work related to the close up of the spare - larger, at an angle, lower drawing. Differences are numerous with misshaped lines, misplaced text and other differences. In the large text to the left of that there are issues with the misalignment of letters and lines. Sure there is more if I spent more time with both. I stopped once I got to a dozen differences. Of course most people looking at the reproduction would never notice and they pass inspection during judging :(  every weekend

Must say (done a fair amount of stickers and decals) that allot of mistakes are a result of a worker thinking they are correcting the original design or taking shortcuts and in turn loose the focus that they should be making an exact copy not a better one


As a note: We don't know what the source is of the decal you posted and if another producer (currently I think there are only two providers) makes a closer or correct one.
« Last Edit: October 23, 2019, 06:50:13 PM by J_Speegle »
Jeff Speegle

Anything worth doing is worth doing concours ;)

Offline J_Speegle

  • Administrator
  • Hero Member
  • *****
  • Posts: 24632
Re: Original 65-66 Jack Instruction label?
« Reply #3 on: October 23, 2019, 08:50:12 PM »
The following pictures were posted in another thread about the same issue

Lots of small drawing details. Lines and fonts (as we've seen on other reproduction) are heavier. There is some distortion due to cameras and angles but corrected for some of those





Jeff Speegle

Anything worth doing is worth doing concours ;)

Offline J_Speegle

  • Administrator
  • Hero Member
  • *****
  • Posts: 24632
Re: Original 65-66 Jack Instruction label?
« Reply #4 on: October 23, 2019, 08:52:23 PM »
Power was down here to my service (imagine that  ::) so did another version with more

Some of the arrows point out spacing and alignment differences or even words in different locations





Jeff Speegle

Anything worth doing is worth doing concours ;)

Offline 21.04

  • Full Member
  • ***
  • Posts: 246
Re: Original 65-66 Jack Instruction label?
« Reply #5 on: October 23, 2019, 11:52:17 PM »
Wow. Thank you for taking the time to break that down! 

-Matt
66 K code Conv GT red/red deluxe 4 spd
66 A code Conv Non-GT black/red deluxe 3 spd
66 Sprint Conv Unrestored Green/blk std 3 spd