Author Topic: Neatness of VIN stamping on 65 Dearborn K Code Engine Block  (Read 1362 times)

Offline 3 Pedals

  • Newbie
  • *
  • Posts: 29
Neatness of VIN stamping on 65 Dearborn K Code Engine Block
« on: October 25, 2018, 08:10:09 PM »
I am looking at a 1965 Mustang that is believed to have a K Code engine. The block is stamped in the correct place but the characters look like a 2nd grader stamped them as they are all helter-skelter. None appear straight up and down but are either rotated to the left or leaning to the right. The stamping is consistently light though and difficult to read. It looks like the VIN starts 5F. I have very limited personal observation of K Code blocks, but they have all been neatly hand stamped. Has anyone seen VINs stamped all messy like this?
« Last Edit: October 25, 2018, 09:29:56 PM by J_Speegle »

Offline RoyceP

  • Hero Member
  • *****
  • Posts: 1536
Re: Neatness of VIN stamping on K Code Engine Block
« Reply #1 on: October 25, 2018, 08:29:05 PM »
Let's see a photo.


I am looking at a 1965 Mustang that is believed to have a K Code engine. The block is stamped in the correct place but the characters look like a 2nd grader stamped them as they are all helter-skelter. None appear straight up and down but are either rotated to the left or leaning to the right. The stamping is consistently light though and difficult to read. It looks like the VIN starts 5F. I have very limited personal observation of K Code blocks, but they have all been neatly hand stamped. Has anyone seen VINs stamped all messy like this?
1968 W code 427 Cougar XR-7 GTE Feb 23 Dearborn C6 / 3.50 open
1968 R code 428CJ Cougar XR-7 May 13 Dearborn C6 / 3.91 T - Lock

Offline Bob Gaines

  • Global Moderator
  • Hero Member
  • ****
  • Posts: 9362
Re: Neatness of VIN stamping on K Code Engine Block
« Reply #2 on: October 25, 2018, 09:11:33 PM »
I have seen others that were not straight before.
Bob Gaines,Shelby enthusiast, Shelby collector , Shelby concours judge SAAC,MCA,Mid America Shelby

Offline J_Speegle

  • Administrator
  • Hero Member
  • *****
  • Posts: 24628
Re: Neatness of VIN stamping on 65 Dearborn K Code Engine Block
« Reply #3 on: October 25, 2018, 09:29:48 PM »
The "look" and practices seem to differ depending on engine, year and plant. For 65 Dearborn examples I normally have seen were sort of straight when compared to other items I mentioned before.  Looks like typically they were not as neat as San Jose for example during the same time period.

Some of the things your seeing may be due to access or where that worker was forced to do the stamping at. The worker may have had to drape themselves over the engine and hold the stamp upside down while striking it with the hammer
Jeff Speegle

Anything worth doing is worth doing concours ;)

Offline CharlesTurner

  • Charles Turner
  • Administrator
  • Hero Member
  • *****
  • Posts: 7687
Re: Neatness of VIN stamping on 65 Dearborn K Code Engine Block
« Reply #4 on: October 25, 2018, 10:19:27 PM »
Like this?
Charles Turner - MCA/SAAC Judge
Concours Mustang Forum Admin

Offline hopeto

  • Full Member
  • ***
  • Posts: 187
Re: Neatness of VIN stamping on 65 Dearborn K Code Engine Block
« Reply #5 on: October 25, 2018, 11:49:03 PM »
Original one owner 84 GT Convertible with 1800 miles. 65 Silver Smoke Gray K Code GT Coupe - 65 Cyclone - 67 Vintage Burgundy K Code GT Coupe.  1970 Calypso Corral Boss 302 - 2012 Yellow Blaze Boss 302.

Offline 3 Pedals

  • Newbie
  • *
  • Posts: 29
Re: Neatness of VIN stamping on 65 Dearborn K Code Engine Block
« Reply #6 on: October 26, 2018, 12:25:13 PM »
Here is a picture of the engine stamping, it does look at a lot like the VIN stamp in pictures posted in reply #4 and #5.
Jeff
« Last Edit: October 26, 2018, 12:43:39 PM by 3 Pedals »

Offline CharlesTurner

  • Charles Turner
  • Administrator
  • Hero Member
  • *****
  • Posts: 7687
Re: Neatness of VIN stamping on 65 Dearborn K Code Engine Block
« Reply #7 on: October 26, 2018, 02:48:59 PM »
Yep, nothing to be concerned about.  With a good cleaning, numbers should show up better.
Charles Turner - MCA/SAAC Judge
Concours Mustang Forum Admin

Offline 3 Pedals

  • Newbie
  • *
  • Posts: 29
Re: Neatness of VIN stamping on 65 Dearborn K Code Engine Block
« Reply #8 on: October 26, 2018, 03:41:22 PM »
Great to know, thanks!

Offline NEFaurora

  • Hero Member
  • *****
  • Posts: 970
Re: Neatness of VIN stamping on 65 Dearborn K Code Engine Block
« Reply #9 on: October 28, 2018, 01:17:24 AM »

Some other Examples...

:o)

Tony K.


Tony Kovar (NEFaurora@aol.com)
1965 Mustang Convertible 200 cid 3spd manual
1966 Mustang Convertible Sprint 200 C4 Auto
2007 Mustang Convertible V6 Auto with "Pony Package".
1966 Mustang Sprint 200 Registry Owner/Moderator
MCA#70001