Author Topic: 1968 Cruise Control Parts Needed  (Read 723 times)

Offline bigdog01

  • Newbie
  • *
  • Posts: 7
1968 Cruise Control Parts Needed
« on: September 13, 2018, 06:22:30 PM »
I am in need of a few parts for a cruise control system.  I need the bezel and the knob for the switch under the dash, I also need a turn signal switch.  I am attaching a picture of the parts I have.

I am just staring to gather parts for this.  I can find information on the 67 install, but nothing for a 68, any help would be appreciated.

« Last Edit: September 13, 2018, 08:02:01 PM by J_Speegle »

Offline preaction

  • Hero Member
  • *****
  • Posts: 1330
Re: 1968 Cruise Control
« Reply #1 on: September 13, 2018, 06:31:37 PM »
Not many cars came with this "new" option contact west coast classic cougars for spare parts.
8F02R218047-  July 18 1968   Dearborn

Offline bigdog01

  • Newbie
  • *
  • Posts: 7
Re: 1968 Cruise Control
« Reply #2 on: September 13, 2018, 06:44:46 PM »
They have very limited parts.  I know this is going to be a journey.  Hopefully someone has parts rat holed.

Offline J_Speegle

  • Administrator
  • Hero Member
  • *****
  • Posts: 24606
Re: 1968 Cruise Control
« Reply #3 on: September 13, 2018, 08:01:47 PM »
This was the second year for the option and there were two different suppliers for the systems (majority of the differences were in the engine compartment)

There is at least one discussion of the 67 system if you do a search

In any case - Welcome to the site and good luck with finding the parts. Most likely will come from a donor car such as a Cougar where the option was allot more popular

Will be moving this thread to the wanted section if you wonder what is going on ;)
Jeff Speegle

Anything worth doing is worth doing concours ;)

Offline 67gta289

  • Hero Member
  • *****
  • Posts: 3080
Re: 1968 Cruise Control Parts Needed
« Reply #4 on: September 13, 2018, 10:31:07 PM »
John
67 289 GTA Dec 20 1966 San Jose
7R02C156xxx
MCA 74660

Offline Bob Gaines

  • Global Moderator
  • Hero Member
  • ****
  • Posts: 9332
Re: 1968 Cruise Control Parts Needed
« Reply #5 on: September 14, 2018, 12:12:00 AM »
I am in need of a few parts for a cruise control system.  I need the bezel and the knob for the switch under the dash, I also need a turn signal switch.  I am attaching a picture of the parts I have.

I am just staring to gather parts for this.  I can find information on the 67 install, but nothing for a 68, any help would be appreciated.
I have a NOS turn signal stalk.PM me if needed.
Bob Gaines,Shelby enthusiast, Shelby collector , Shelby concours judge SAAC,MCA,Mid America Shelby

Offline J_Speegle

  • Administrator
  • Hero Member
  • *****
  • Posts: 24606
Re: 1968 Cruise Control Parts Needed
« Reply #6 on: September 14, 2018, 01:32:09 AM »
Removed a couple of posts since this area is for wanted items and not really for long discussions about subjects.  Those often get separated and placed elsewhere. ;)  Will try and figure out how to merge #5 with the thread mentioned in #4
« Last Edit: September 14, 2018, 01:34:59 AM by J_Speegle »
Jeff Speegle

Anything worth doing is worth doing concours ;)