Author Topic: Throttle Linkage Modification?  (Read 622 times)

Offline 66RavenGTCoupeAgain

  • Full Member
  • ***
  • Posts: 200
Throttle Linkage Modification?
« on: September 19, 2018, 04:28:33 AM »
I hope this is not too off topic but I have seen two kick downs like this now. It looks as if a part that points down on the horizontal section of the rod has been cut off. Is this correct and if so was it a factory practice or a previous owners handiwork?
66 Metuchen NJ  GT Coupe
Raven with Deluxe Black Int 289 A Code C4 PS Tinted Windows (Green) Dealer installed Rear Speaker
6T07A1612## Dec 65 Build
65 San Jose CA Convertible Rangoon Red with White Int and Power Top with plastic rear window 289 C Code C4 PS PB AC Fog Lights
5R08C1496## Oct 64 Build

Offline J_Speegle

  • Administrator
  • Hero Member
  • *****
  • Posts: 24620
Re: Throttle Linkage Modification?
« Reply #1 on: September 19, 2018, 06:03:36 AM »
I hope this is not too off topic but I have seen two kick downs like this now. It looks as if a part that points down on the horizontal section of the rod has been cut off. Is this correct and if so was it a factory practice or a previous owners handiwork?


Seen that on cars guys converted to manual transmissions. Kick down's not going to work with it that way. Guess its easier than finding another originally from a manual car but just looks half a**

Have not seen this on an original automatic or manual 66
Jeff Speegle

Anything worth doing is worth doing concours ;)

Offline CharlesTurner

  • Charles Turner
  • Administrator
  • Hero Member
  • *****
  • Posts: 7687
Re: Throttle Linkage Modification?
« Reply #2 on: September 19, 2018, 01:07:21 PM »
Looks like the 66-up accelerator linkage.  This topic is concerning 65's.
Charles Turner - MCA/SAAC Judge
Concours Mustang Forum Admin

Offline 66RavenGTCoupeAgain

  • Full Member
  • ***
  • Posts: 200
Re: Throttle Linkage Modification?
« Reply #3 on: September 19, 2018, 08:27:08 PM »
Sorry but I should have stated that my original question is for a Oct 64 SJ with C4.
So would this be the correct one then?
66 Metuchen NJ  GT Coupe
Raven with Deluxe Black Int 289 A Code C4 PS Tinted Windows (Green) Dealer installed Rear Speaker
6T07A1612## Dec 65 Build
65 San Jose CA Convertible Rangoon Red with White Int and Power Top with plastic rear window 289 C Code C4 PS PB AC Fog Lights
5R08C1496## Oct 64 Build

Offline CharlesTurner

  • Charles Turner
  • Administrator
  • Hero Member
  • *****
  • Posts: 7687
Re: Throttle Linkage Modification?
« Reply #4 on: September 19, 2018, 10:36:40 PM »
Sorry but I should have stated that my original question is for a Oct 64 SJ with C4.
So would this be the correct one then?

Yes, looks like the right one, although the upper shaft appears bent.
Charles Turner - MCA/SAAC Judge
Concours Mustang Forum Admin

Offline J_Speegle

  • Administrator
  • Hero Member
  • *****
  • Posts: 24620
Re: Throttle Linkage Modification?
« Reply #5 on: September 19, 2018, 11:07:36 PM »
Sorry but I should have stated that my original question is for a Oct 64 SJ with C4.
So would this be the correct one then?


Reply #22 before I started labeling each picture for this very purpose :(

Oct 64 San Jose car again ;) Biggest picture in the post - about half way through labeled some like "middle of firewall"

http://www.concoursmustang.com/forum/index.php?topic=7839.15

Not familiar with the stamping
Jeff Speegle

Anything worth doing is worth doing concours ;)

Offline 66RavenGTCoupeAgain

  • Full Member
  • ***
  • Posts: 200
Re: Throttle Linkage Modification?
« Reply #6 on: September 19, 2018, 11:31:46 PM »
Whoop there it is! Thanks Jeff.
66 Metuchen NJ  GT Coupe
Raven with Deluxe Black Int 289 A Code C4 PS Tinted Windows (Green) Dealer installed Rear Speaker
6T07A1612## Dec 65 Build
65 San Jose CA Convertible Rangoon Red with White Int and Power Top with plastic rear window 289 C Code C4 PS PB AC Fog Lights
5R08C1496## Oct 64 Build