Author Topic: 69/70 shelby - some fit mustang - pretty good list  (Read 1230 times)

Offline acman63

  • Full Member
  • ***
  • Posts: 111
69/70 shelby - some fit mustang - pretty good list
« on: May 17, 2016, 01:15:54 AM »
69/70 shelby parts- some fit Mustang as well.

Original antenna - nice used $750

Fiberglass Hood -  original  nice shape   $3000

nos  fiberglass hood skin lower with nos latch bracket  $1500

stripe kit reflective - all colors and models available  $175

NOS fastback side scoop  $100

convertible side scoops  $400  pr.   (1)  nos   (1)  nice used original undrilled

nos hood latch plate - riveted to hood  - $45

Hood Pins - assemblyline  - flat on bottom  rechromed    $300  pr.

Hood Pin plates - polished stainless -  glue to top of hood   $40  pr.

Hood Pins  lower plate - glues to bottom of hood .  $30  pr.

Original eyebrows -  rechromed  $1000  pr.

Original assemblyline  428 fan shroud  nice used   $1200

Original heater assembly $300

428 CJ  bare block 8J20  428 CJ Heads 8J and 8K dates  bare.  core parts - already oven baked, steelebrated with ss shot,  magna fluxed  for cracks  $3000  as a set

428 CJ  smog adjusting  and mount brackets   $250  nice shape  detailed dipped black paint

428 CJ  pulleys   non air  $300  pr,

Front bumper arms,  originals  $400 pr.

Foglight support bracket original steel  $400

Power Steering Pulley  80B  marked - original nice redone   $300

Battery Heat shield 27 series - original C7ZB-10A682-B  has a small chip out of one corner  but its a real one and very rare this size  $500 

NOS convertible top bow  C9ZZ-7651274-A   $100

NOS CONVERTIBLE RH  2 piece  endcap - assemblylline   $300

428  PS  adjuster bracket  - nice pit free western part  restored dipped $100,

Steering Box   - correct SMB-K   dated .  restored bare metal box   inside and out  .  $450

Restored upper radiator bracket GT500   $75

70 Front spoiler - older reproduction  ABS Plastic like originals   $395

Fiberglass Headlight Buckets - restored to concours, pink finish . ready for that concours car $2000  pr.

axle tube - 2 hole  CJ style   primed and sanded.  primed again.  ready for paint  $600

428 starter autolite- restored inside and out    $350

Shock Tower upper brackets with washers - originals  redone   $150  pr.

Disc Brake Dust shields - nice originals, already detailed and dipped in black for that authentic look  $195  pr.

28 spline axles . restored,  cleaned , magna fluxed ,  checked for runout on flange,  replated studs,  new bearings  $300 pr.

31 spline axles.  . restored, cleaned,  magnafluxed  checked for runout on flange, replated studs,  new bearings , seal spacer.  ready to install .  $650  pr.


Coil spring Guards, Nice original western parts.  cleaned detailed painted batch paint $150  pr.

Convertible extended window cranks   , nice used   $75

Original front plastic splash shields - nice used  $150  pr.

Original assemblyline master cylinder, restored  $400

428 Rear brass intake fitting -2 piece, nice originals    $75

Disc Brake spindles - C8s  . cleaned,  magna fluxed,  detailed,  machined bare areas.  $300 pr.

Kelsey Hayes disc brake rotors - 2 piece , restored  $350  pr.

Pics available  inquire

920 434 3645   or jim@shelbyparts.com
« Last Edit: May 17, 2016, 03:42:26 PM by acman63 »