Topic: Correct Floor Plan Plug - 70 NJ

[joe747]

i have a few different plugs , but i am not sure which one is correct for the floor pan drain hole .does anyone have a pic of this plug
thanks

[J_Speegle]

Looks like they used the dished/ concaved style at NJ in 70  (from your earlier post)


0T02G115584




0Txxx1220xx

[joe747]

sorry Jeff
 i meant the ones just above the floor support . all the suppliers list them in their catologs but they are the one for the seat holes

[J_Speegle]

Sorry Joe but (its me ) can't figure out the ones that your referring to "just above the floor support"   

[joe747]

there is a hole in the inside of the car at the floor centered aboce the front frame /floor support .it is on both sides . i have treid all kinds of rubber plus and none will fit ,it is 1 inch dia.

[J_Speegle]

there is a hole in the inside of the car at the floor centered above the front frame /floor support .it is on both sides . i have treid all kinds of rubber plus and none will fit ,it is 1 inch dia.

Ok - the upper hole that held the car to the skid/dolly during the body assembly. Not all of the plugs are reproduced so you may have to find and use an original. Or settle on a smaller size with some strip chalking around it