Author Topic: Which is correct?? 1970 1/4 Window Upper Pivot Stainless  (Read 1411 times)

Offline D0ZZ70MACH

  • Jr. Member
  • **
  • Posts: 62
  • 1970 Mach 1 Dearborn 11/10/1969
Which is correct?? 1970 1/4 Window Upper Pivot Stainless
« on: January 05, 2016, 11:20:28 PM »
I'm looking for some advice regarding the correct stainless trim for the upper 1/4 window pivots.  I have two sets with different styles of stainless but can't remember which ones I removed from my car.  The attached photos show the same side (L/H I believe) with the different types of stainless.  Is it a case of different suppliers or is one from a different vehicle??  Any thoughts?  Thanks!!

Offline Brian Conway

  • Hero Member
  • *****
  • Posts: 1623
Re: Which is correct?? 1970 1/4 Window Upper Pivot Stainless
« Reply #1 on: January 06, 2016, 05:58:49 PM »
No help but part of the converstion ?  This is on a 69 Dearborn 150xxx car.  Brian
5RO9A GT  4 Spd Built 5/29/65
9TO2R SCJ 4 Spd Built 9/19/68
Owner Driver Mechanic
San Diego, Ca.

Offline D0ZZ70MACH

  • Jr. Member
  • **
  • Posts: 62
  • 1970 Mach 1 Dearborn 11/10/1969
Re: Which is correct?? 1970 1/4 Window Upper Pivot Stainless
« Reply #2 on: January 06, 2016, 10:32:54 PM »

Thank you Brian!!  I appreciate the feedback.

Aaron

Offline PerkinsRestoration

  • Sr. Member
  • ****
  • Posts: 292
Re: Which is correct?? 1970 1/4 Window Upper Pivot Stainless
« Reply #3 on: January 07, 2016, 12:07:13 AM »
 The roof rail weather strip retainers for 63 body code are slightly different for 69 vs 70. As a result the stainless retainer for quarter glass is slightly different. Your picture shows both years. The picture Brian supplied is typical for 69.

Offline D0ZZ70MACH

  • Jr. Member
  • **
  • Posts: 62
  • 1970 Mach 1 Dearborn 11/10/1969
Re: Which is correct?? 1970 1/4 Window Upper Pivot Stainless
« Reply #4 on: January 07, 2016, 11:29:06 PM »

Thank you Bob!!!  I really appreciate your feedback.

I didn't realize the weather strip retainers were different between 69 & 70.   

Aaron