« previous next »
Pages: [1]   Go Down

Author Topic: PS Pulley ID....  (Read 1208 times)

Offline Oz390

  • Hero Member
  • *****
  • Posts: 729
PS Pulley ID....
« on: January 24, 2015, 08:05:54 PM »
Helped a friend debug some convertible top issues and he gave me a complete 66 PS setup (replaced with Borgson style).  As most of it appears OEM, Bendix 66 date stamped ram and what appears to be OEM drag link, tie rods and control valve I gladly accepted.

The pump is obviously a later replacement.. HBA EL tag, think its mid 70s with a weird really, really long return tube (8" or so) tacked to the housing and pointing up...

The pulley is FoMoCo, stamped 5Z AIA... and a "C6" with a smaller "S2" under it. I can't find a reference.  Anyone know what it might be from?  Single sheave, and about 5 3/4" diameter.  Displaced AC pulley, or?  :-\
Logged
8R03S : 76A I 2A 15M 72 5 U
8R01S : 65A B 2A 28M 72 7 5 - Factory GT
8R01C : 65A M 2A 01E 72 2 W - Cal Special
8F01X : 65A I 2A 2G 20E 24 1 U - EXP500 repli-bute

Offline suskeenwiske

  • Sr. Member
  • ****
  • Posts: 417
  • 214-347-3628
Re: PS Pulley ID....
« Reply #1 on: April 01, 2015, 11:09:03 PM »
Can you take a photo or photos of the Pulley that shows these details...may make it easier to identify. Also, any idea what model car this assembly was pulled from and was it Dearborn, San Jose or Metuchen built?

Ray
Logged
Ray
1965 Dearborn Coupe
6 Cylinder, AT, PB, PS, AC
Est. Build 23A

Offline WT8095

  • Hero Member
  • *****
  • Posts: 941
  • Dave Z.
Re: PS Pulley ID....
« Reply #2 on: April 01, 2015, 11:35:54 PM »
Quote from: Oz390 on January 24, 2015, 08:05:54 PM
The pulley is FoMoCo, stamped 5Z AIA...

I think that may be A1A (numeral "1", not the letter "I")
Logged
Dave Z.

'68 fastback, S-code + C6. Special Paint (Rainbow promotion), DSO 710784. Actual build date 2/7/1968, San Jose.
'69 Cougar convertible, 351W-2V + FMX, Meadowlark Yellow.
Pages: [1]   Go Up
« previous next »