« previous next »
Pages: [1]   Go Down

Author Topic: Distributor Cap  (Read 2622 times)

Offline Twilight65

  • Gold Level Subscriber
  • Sr. Member
  • *****
  • Posts: 380
Distributor Cap
« on: February 03, 2010, 06:19:03 PM »
I'm looking to get the correct Distributor Cap (7HA 12106) for my May 1966 convertible with 200 CI. What would be correct,  a Fomoco, or an Autolite ?

Thanks,
Dave
« Last Edit: February 03, 2010, 07:54:04 PM by Twilight65 »
Logged
65 Coupe Dearborn Scheduled Build July 9,1965 289/C4
66 Sprint Conv. Dearborn Scheduled Build May 13, 1966 200/C4

Offline Twilight65

  • Gold Level Subscriber
  • Sr. Member
  • *****
  • Posts: 380
Re: Distributor Cap
« Reply #1 on: February 03, 2010, 08:21:36 PM »
Ok looks like I've answered my own question. MCA rule book says FOMOCo or AUTOLITE. Either with #1 or Autolite on cap. The FOMOCO I found has 1 thru 6 on cap. I'm guessing the cap with just the #1 is for a V8.

Dave
Logged
65 Coupe Dearborn Scheduled Build July 9,1965 289/C4
66 Sprint Conv. Dearborn Scheduled Build May 13, 1966 200/C4

Offline J_Speegle

  • Administrator
  • Hero Member
  • *****
  • Posts: 24628
Re: Distributor Cap
« Reply #2 on: February 04, 2010, 03:08:52 AM »
Yes the V8 FoMoCo was the one with only the 1 on the top of the cap. If you need a 6 cyl AUTOLITE I should still have a couple of NOS ones if the FoMoCo you found is not nice enough for your use
Logged
Jeff Speegle

Anything worth doing is worth doing concours ;)

Offline Twilight65

  • Gold Level Subscriber
  • Sr. Member
  • *****
  • Posts: 380
Re: Distributor Cap
« Reply #3 on: February 04, 2010, 01:46:29 PM »
Hey Jeff,
Thanks for the offer I'll send you a PM.
Thanks
Dave
Logged
65 Coupe Dearborn Scheduled Build July 9,1965 289/C4
66 Sprint Conv. Dearborn Scheduled Build May 13, 1966 200/C4

Offline Brian Conway

  • Hero Member
  • *****
  • Posts: 1623
Re: Distributor Cap
« Reply #4 on: May 17, 2015, 10:30:31 PM »
     Doing a little research for a 6 cylinder distributor cap and came across this topic.  Interesting that the Autolite and FoMoCo are mentioned and not the Motorcraft.  I have a NOS Motorcraft cap and rotor.  If not ' correct ' for 65-66 what years are the Motorcraft acceptable or correct for ?  Thanks,  Brian
Logged
5RO9A GT  4 Spd Built 5/29/65
9TO2R SCJ 4 Spd Built 9/19/68
Owner Driver Mechanic
San Diego, Ca.

Offline J_Speegle

  • Administrator
  • Hero Member
  • *****
  • Posts: 24628
Re: Distributor Cap
« Reply #5 on: May 17, 2015, 10:37:06 PM »
Quote from: Brian Conway on May 17, 2015, 10:30:31 PM
....... If not ' correct ' for 65-66 what years are the Motorcraft acceptable or correct for ?  Thanks,  Brian

72 up
Logged
Jeff Speegle

Anything worth doing is worth doing concours ;)

Offline Brian Conway

  • Hero Member
  • *****
  • Posts: 1623
Re: Distributor Cap
« Reply #6 on: May 17, 2015, 10:47:50 PM »
Thank you Jeff.
Logged
5RO9A GT  4 Spd Built 5/29/65
9TO2R SCJ 4 Spd Built 9/19/68
Owner Driver Mechanic
San Diego, Ca.
Pages: [1]   Go Up
« previous next »