As we've mentioned in other treads - please make sure that all of the other details are correct on your car before you waste time adding paint marks since they are not required and if not there will not cost you any points. If they are applied they can cost you points and cause you some embarrassment. Incorrect things in other parts of the car should be focused on first before worrying about the circus colors are added - they can always be added later
Just something to consider
Coil springs look like they were - 1 Gold & 1 Tan. From a buildsheet equipped like yours - three months later
What about front & rear shocks?
White front - Violet on the rear
Front sway bar looks like it should be 1 green/ 1 yellow, where at? Rear springs are 2 yellow/ 2 brown, where at?
Green and yellow was a standard marking found on the big front sway bars 67-70 (GTs and Mach I's in general) Picture is very flushed out
Yes rear springs 2 Yellow and 2 Brown - applied to the bottom (once installed) surface of the longer leaf springs right in front of the rear shackle
I don't see anything about the rear sway bar, did that have a marking? What color and where at? Approximately how wide are markings, similar to driveshaft stripe widths? or how wide?
Looks like its the same as some other applications - one green stripe/daub on the drivers side end of the bar
Hope this helps
And a little extra for you
Idler arm - green stripe on mounting arm
Idler arm - yellow stripe on the moving arm
Pittman arm - yellow strip approx around the middle of the arm
Center line - yellow stripe around.