Author Topic: Wire clip @ veritcal dash support (67 SanJose Fastback)  (Read 966 times)

Offline Angela

  • Hero Member
  • *****
  • Posts: 836
Wire clip @ veritcal dash support (67 SanJose Fastback)
« on: March 30, 2014, 07:08:07 PM »
I'd like to acquire the clip circled in the image below, assuming this part actually exists. My dash has a hole and a screw in this exact location which I believe held this clip. If you have one, please contact me. Thanks.
« Last Edit: March 30, 2014, 08:25:34 PM by Angela »

Offline suskeenwiske

  • Sr. Member
  • ****
  • Posts: 417
  • 214-347-3628
Re: Wire clip @ veritcal dash support
« Reply #1 on: March 30, 2014, 07:50:48 PM »
The picture comes up too fuzzy on my laptop...can't make it out. What year car do you have?

Ray
Ray
1965 Dearborn Coupe
6 Cylinder, AT, PB, PS, AC
Est. Build 23A

Offline jwc66k

  • Hero Member
  • *****
  • Posts: 7351
Re: Wire clip @ veritcal dash support
« Reply #2 on: March 30, 2014, 08:26:46 PM »
Angela,
 That picture is for a 6 cylinder A/C under dash wiring. I think you want page 89 for V8 engines, which shows a different part, 352541-S100. That part is very similar to 377986-S and 382184-S.
Jim
I promise to be politically correct in all my posts to keep the BBBB from vociferating.

Offline Angela

  • Hero Member
  • *****
  • Posts: 836
Re: Wire clip @ veritcal dash support (67 SanJose Fastback)
« Reply #3 on: March 30, 2014, 08:33:34 PM »
Jim, I know that pg 80 isn't for V8 applications. However, the plastic clip on pg 89 for V8's requires a larger dia. hole in the dash suppprt, whereas my dash doesn't have that large of a hole and a sheet metal screw (identical to the GND wire that attaches above this location) was present in this location when I bought the car. The clip, however, was broken but looks like the 6cyl clip shown on pg 80.

Offline ruppstang

  • Hero Member
  • *****
  • Posts: 3938
Re: Wire clip @ veritcal dash support (67 SanJose Fastback)
« Reply #4 on: March 30, 2014, 08:52:47 PM »
I have those too. just put my number on your speed dial. Marty