Author Topic: Headlight Logo Etching  (Read 17395 times)

Offline rodster

  • Hero Member
  • *****
  • Posts: 1011
Re: Headlight Logo Etching
« Reply #30 on: September 15, 2012, 10:14:30 PM »
Well the stencils turned out better than I expected and the results are stunning.  This process worked perfectly.   :D

First step is to apply the stencil, second step is blast it for a few seconds with the sand etch gun, the third  step is to pull off the tape, final step-stand back and admire!

Very nice!  Thanks for sharing.  :)
1965 Dearborn Mustang Coupe
Raven Black - Palomino Pony
1967 Dearborn Mustang Conv.
Wimbeldon White - Red
1984 SVO - 2A

Offline C5ZZKGT

  • Gold Level Subscriber
  • Hero Member
  • *****
  • Posts: 787
Re: Headlight Logo Etching
« Reply #31 on: September 29, 2012, 01:23:53 PM »
Well the stencils turned out better than I expected and the results are stunning.  This process worked perfectly.   :D

First step is to apply the stencil, second step is blast it for a few seconds with the sand etch gun, the third  step is to pull off the tape, final step-stand back and admire!

This is fantastic!! again what lights did you start with?

Offline Skyway65

  • Gold Level Subscriber
  • Hero Member
  • *****
  • Posts: 517
Re: Headlight Logo Etching
« Reply #32 on: September 30, 2012, 09:24:52 AM »
I was able to locate a pair of NOS General Electric 6012 lamps.  They are the old style lights that matched the one original that I had still had.  These lights would have been sold at an auto parts store many years ago but they did not have the FOMOCO logo on them. 
Gary Schweitzer
MCA #00181
Traverse City, MI

"A work of art in the form of a Mustang"

Offline C5ZZKGT

  • Gold Level Subscriber
  • Hero Member
  • *****
  • Posts: 787
Re: Headlight Logo Etching
« Reply #33 on: January 28, 2013, 09:29:12 AM »
-Do we know what plants typically used what bulbs in what years? were the etched ones used throughout? or were the embossed ones used along the line as well?

Offline J_Speegle

  • Administrator
  • Hero Member
  • *****
  • Posts: 24578
Re: Headlight Logo Etching
« Reply #34 on: January 28, 2013, 05:56:09 PM »
-Do we know what plants typically used what bulbs in what years? were the etched ones used throughout? or were the embossed ones used along the line as well?

Don't believe there is enough data to make any conclusions - JMHO
Jeff Speegle

Anything worth doing is worth doing concours ;)

Offline C5ZZKGT

  • Gold Level Subscriber
  • Hero Member
  • *****
  • Posts: 787
Re: Headlight Logo Etching
« Reply #35 on: January 29, 2013, 09:57:53 AM »
Thanks Jeff!  I also see where someone has started reproducing the etched lights again, not sure if THEY are incandescent or Halogen.....

Offline bryancobb

  • Silver Level Subscriber
  • Hero Member
  • ****
  • Posts: 1077
  • 2009 Ridn' Around
Re: Headlight Logo Etching
« Reply #36 on: January 29, 2013, 06:56:40 PM »
My friend on Facebook did it.  Here's a PICTURE.  His name is Kelly Sedars.  I have no idea how he git the stencils.

« Last Edit: January 29, 2013, 06:59:05 PM by bryancobb »
66 Metuch Conv
Nightmist, Std Blu Int
6T08C223904    76A       K         22       15c     21      6        6
                      BODY  COLOR   TRIM    DATE   DSO   AXLE  XMSN
   C/O  785                                   (rotation #)
   16    C14   6T08C223904        (weld bay 16, bucked MAR 14)

Offline C5ZZKGT

  • Gold Level Subscriber
  • Hero Member
  • *****
  • Posts: 787
Re: Headlight Logo Etching
« Reply #37 on: January 30, 2013, 09:35:51 AM »
Those look like the ones for glass.......not headlights......

Offline bryancobb

  • Silver Level Subscriber
  • Hero Member
  • ****
  • Posts: 1077
  • 2009 Ridn' Around
Re: Headlight Logo Etching
« Reply #38 on: January 30, 2013, 05:22:36 PM »
Same Principle, approximate complexity and technique.... :P
66 Metuch Conv
Nightmist, Std Blu Int
6T08C223904    76A       K         22       15c     21      6        6
                      BODY  COLOR   TRIM    DATE   DSO   AXLE  XMSN
   C/O  785                                   (rotation #)
   16    C14   6T08C223904        (weld bay 16, bucked MAR 14)

Offline Skyway65

  • Gold Level Subscriber
  • Hero Member
  • *****
  • Posts: 517
Re: Headlight Logo Etching
« Reply #39 on: January 30, 2013, 08:02:03 PM »
It would look a whole lot nicer with a cold beer filling it up 8)
Gary Schweitzer
MCA #00181
Traverse City, MI

"A work of art in the form of a Mustang"

Offline C5ZZKGT

  • Gold Level Subscriber
  • Hero Member
  • *****
  • Posts: 787
Re: Headlight Logo Etching
« Reply #40 on: January 31, 2013, 07:56:43 AM »
It would look a whole lot nicer with a cold beer filling it up 8)

+1!!

Offline Stangman68

  • Jr. Member
  • **
  • Posts: 84
Re: Headlight Logo Etching
« Reply #41 on: April 27, 2013, 06:05:54 PM »
Well can "we" get the stencils, sand blast bottle, etc....to do it yourselfers????  Also any source for the smaller 69 bulbs, or i assume this etch stencil process can be done of the smaller bulbs as well. 

Offline Skyway65

  • Gold Level Subscriber
  • Hero Member
  • *****
  • Posts: 517
Re: Headlight Logo Etching
« Reply #42 on: April 27, 2013, 10:05:49 PM »
Well can "we" get the stencils, sand blast bottle, etc....to do it yourselfers???? 

I am a total do-it-your-selfer, not a pro by any stretch of the imagination.  I spent 3 months tracking down all the info I needed to get this job done.  That is half the fun of this hobby- researching, looking, experimenting with different techniques,etc. and then sharing what you learned.  There is no secret here, it's all about the motivation to make the car as close to factory as possible.  And yes, the etching technique will work on any glass object wether it be a '69 headlight or a cold beer mug.  ;)
Gary Schweitzer
MCA #00181
Traverse City, MI

"A work of art in the form of a Mustang"

Offline krelboyne

  • Hero Member
  • *****
  • Posts: 1221
    • West Coast Classic Cougars
Re: Headlight Logo Etching
« Reply #43 on: April 28, 2013, 02:44:23 AM »
Well can "we" get the stencils, sand blast bottle, etc....to do it yourselfers????  Also any source for the smaller 69 bulbs, or i assume this etch stencil process can be done of the smaller bulbs as well.

We stock and sell the 1969 4 headlight system with FoMoCo etchings used.

http://www2.cougarpartscatalog.com/hibeam.html
http://www2.cougarpartscatalog.com/67lobeam.html

You can request dates.
Scott Behncke - Carcheaologist
West Coast Classic Cougars
503-463-1130
1968 GT/CS 302-4V San Jose 05B
1968 Cougar XR7 Dearborn 09A