Author Topic: Thermostat housing  (Read 3820 times)

Offline CharlesTurner

  • Charles Turner
  • Administrator
  • Hero Member
  • *****
  • Posts: 7687
Thermostat housing
« on: November 01, 2011, 08:12:44 PM »
Working on a 289 that has the recess in the intake for the thermostat but for the life of me, I can't find a t-stat housing without the recess.  If I want to fill in the recess on a t-stat housing, what would be the materials recommendation?  Some kind of waterproof epoxy I'm guessing?
Charles Turner - MCA/SAAC Judge
Concours Mustang Forum Admin

Offline rodster

  • Hero Member
  • *****
  • Posts: 1011
Re: Thermostat housing
« Reply #1 on: November 01, 2011, 08:22:06 PM »

JB Weld perhaps? If not, they make a Water Weld product. No thermostat housing modification experience but I'm always good for at least one opinion.  ;D
1965 Dearborn Mustang Coupe
Raven Black - Palomino Pony
1967 Dearborn Mustang Conv.
Wimbeldon White - Red
1984 SVO - 2A

Offline ruppstang

  • Hero Member
  • *****
  • Posts: 3936
Re: Thermostat housing
« Reply #2 on: November 01, 2011, 08:35:40 PM »
Possibly could mill down the housing to remove the recess? Or fill with JB weld. Marty

Offline JKWilson

  • Sr. Member
  • ****
  • Posts: 307
Re: Thermostat housing
« Reply #3 on: November 01, 2011, 10:48:21 PM »
Charles it's kinda surprising to me that you haven't been able to locate a housing without the recess. The reason I say that is, it seems the majority of nice ones I frequently find on Fleabay are the early no-recess units. Of course that's also because I'm always watching for nice recessed housings!  ;)

Are you looking specifically for NOS, or just really nice condition?
'66 GT Fastback,  Metuchen, 10/28/65, 289-4v w/4spd
'66 Sprint Coupe, Dearborn, 06/11/66, 200ci w/ C4
'91 LX Convertible, Dearborn, 08/91, 5.0 w/AOD
'92 LX Hatchback, Dearborn, 5.0 w/AOD

Offline CharlesTurner

  • Charles Turner
  • Administrator
  • Hero Member
  • *****
  • Posts: 7687
Re: Thermostat housing
« Reply #4 on: November 02, 2011, 12:52:15 AM »
Just something in decent condition.  I found a couple of the ones with the recess today looking through my junk (spare) bins!
Charles Turner - MCA/SAAC Judge
Concours Mustang Forum Admin

Offline JKWilson

  • Sr. Member
  • ****
  • Posts: 307
Re: Thermostat housing
« Reply #5 on: November 02, 2011, 02:42:50 AM »
I'll keep my eyes open for one without the recess and let you know if I run across one.
'66 GT Fastback,  Metuchen, 10/28/65, 289-4v w/4spd
'66 Sprint Coupe, Dearborn, 06/11/66, 200ci w/ C4
'91 LX Convertible, Dearborn, 08/91, 5.0 w/AOD
'92 LX Hatchback, Dearborn, 5.0 w/AOD

Offline Brant

  • Sr. Member
  • ****
  • Posts: 497
    • Virginia Classic Mustang Inc
Re: Thermostat housing
« Reply #6 on: November 02, 2011, 09:35:26 AM »
Charles,
I sent you an email.

Offline flyingfred

  • Jr. Member
  • **
  • Posts: 55
Re: Thermostat housing
« Reply #7 on: November 26, 2011, 01:21:23 PM »
Charles, I have an NOS thermostat housing without the recess if you still need one.

-Fred-

Offline john_simms

  • Newbie
  • *
  • Posts: 49
Re: Thermostat housing
« Reply #8 on: December 29, 2011, 11:09:22 PM »
I am assuming that if the manifold has a recess, then the waterneck housing should not?  If so, I too am looking for either a good used or newer replacement housing.  The one currently on my car has a recess in it too (see related post from me earlier tonight).

Offline JKWilson

  • Sr. Member
  • ****
  • Posts: 307
Re: Thermostat housing
« Reply #9 on: January 04, 2012, 03:22:02 AM »
'66 GT Fastback,  Metuchen, 10/28/65, 289-4v w/4spd
'66 Sprint Coupe, Dearborn, 06/11/66, 200ci w/ C4
'91 LX Convertible, Dearborn, 08/91, 5.0 w/AOD
'92 LX Hatchback, Dearborn, 5.0 w/AOD

Offline CharlesTurner

  • Charles Turner
  • Administrator
  • Hero Member
  • *****
  • Posts: 7687
Re: Thermostat housing
« Reply #10 on: January 04, 2012, 06:25:25 PM »
Thanks, was able to acquire one a while back.  They're not too difficult to find NOS, but good used ones seem to be kind of rare.
Charles Turner - MCA/SAAC Judge
Concours Mustang Forum Admin

Offline john_simms

  • Newbie
  • *
  • Posts: 49
Re: Thermostat housing
« Reply #11 on: January 09, 2012, 09:52:54 AM »
I too found a NOS one.  Thanks for the information though.

John