Topic: Help needed id'ing 2 parts

[hkopp]

These were in the glove box of my 69 Grande when I bought it in 1985 and I have no idea what they are for. I had sold the car shortly after and it sat untouched for 20 yrs, when I bought it back all the parts were still where I left them in 1987.  The large one is rubbery and has a number of C9ZB 652407 A W and has Fomoco insignia next to it with a circled IMC and a half diamond next to the C.    The one side has rounded edges, a notch on each end and a round cutout on the right.  The back is flat.

The other item looks like it should be wrapped around a harness with tape to hold the harness in place.

Any ideas?

[jwc66k]

The first one is the insert for a door pull on the driver's side.
The second is a wire harness retainer that is part of the harness to snap into a hole in a panel. The harnesses that have a woven type cloth/thread covering vs a taped covering, use and lose them often.
Jim

[Brian Conway]

The first item; C9ZB 6524047  AW  is the insert at the bottom of the Deluxe door panel cup.  Protects your finger nails and covers the screw head ?  This one is on my left door.  The one on my right door is marked C9ZB 6524046  AW with the same logos.  As to the second item; Don't know.    Brian

[hkopp]

ahah! Why didnt I notice that...well the car is now just a shell which was dismantled 27 yrs ago.    I dont have these in my other 69, guess thats why I didnt recognize them.  thanks!!

[J_Speegle]

Agree that the second item looks like a wire loom attaching clip but have not see one shaped like that (or color) used on a 69 or 70. Normally off white with a clip made of just two ears and a flat somewhat curved (to fit around the wire loom)  that is attached and tapped into the wire loom.

[ClevelandKid]

Man I need one of those C9ZB 6524047  AW door cup inserts for my Boss. I need a white one. Anyone know who has them ?

[J_Speegle]

Man I need one of those C9ZB 6524047  AW door cup inserts for my Boss. I need a white one. Anyone know who has them ?

There was a point a few years back when no one had any of the white reproductions - not sure if the shortage is still on going.

Guessing you have already checked with the large places like Virgina Mustang and NPD

[ClevelandKid]

Yea I have all the catalogs and don't find a listing for them. I think there would be a demand for these as they often get lost while restoring or replacing door panels and speakers. My original door panels had them. I still have the passenger side but the drivers side came up MIA when I replaced the door panels. 

[J_Speegle]

Guess they never came back once they made (reproduced) the last batch

Only hope now would be finding a pair used (yes I know you need only one but better find a pair   or someone that purchased some for a project and never used them

Good luck with the hunt