Author Topic: Watershield install  (Read 2081 times)

Offline 68 S Code

  • Hero Member
  • *****
  • Posts: 1084
Watershield install
« on: August 02, 2011, 08:52:00 AM »
Getting ready to start installing interior trim. I believe that there are watershields at doors and below rear quarter windows? What should I use to hold them in place? Is there a product out there similar to the grey sealant that never dried similar to original?

Offline CharlesTurner

  • Charles Turner
  • Administrator
  • Hero Member
  • *****
  • Posts: 7686
Re: Watershield install
« Reply #1 on: August 02, 2011, 10:46:36 AM »
I use 3M bedding and glazing compound, easy to apply with a caulk gun.
Charles Turner - MCA/SAAC Judge
Concours Mustang Forum Admin

Offline 68 S Code

  • Hero Member
  • *****
  • Posts: 1084
Re: Watershield install
« Reply #2 on: August 02, 2011, 11:00:53 AM »
Charles, where do you find this. Is it in a caulking tube?

Offline CharlesTurner

  • Charles Turner
  • Administrator
  • Hero Member
  • *****
  • Posts: 7686
Re: Watershield install
« Reply #3 on: August 02, 2011, 02:32:36 PM »
Yes, in a caulking tube.  Any of the parts vendors sell it and you can buy it locally at an auto parts store or paint-refinish supply store.
Charles Turner - MCA/SAAC Judge
Concours Mustang Forum Admin

Offline 68 S Code

  • Hero Member
  • *****
  • Posts: 1084
Re: Watershield install
« Reply #4 on: August 02, 2011, 03:56:07 PM »
The 3M glazing sealant I used at the windshield looked like polyurethane and dries fairly solid but was somewhat flexible. Does that sound like the product? Black in color.

Offline CharlesTurner

  • Charles Turner
  • Administrator
  • Hero Member
  • *****
  • Posts: 7686
Re: Watershield install
« Reply #5 on: August 02, 2011, 05:08:14 PM »
The 3M glazing sealant I used at the windshield looked like polyurethane and dries fairly solid but was somewhat flexible. Does that sound like the product? Black in color.

Probably the same stuff.
Charles Turner - MCA/SAAC Judge
Concours Mustang Forum Admin

Offline 68 S Code

  • Hero Member
  • *****
  • Posts: 1084
Re: Watershield install
« Reply #6 on: August 02, 2011, 06:48:22 PM »
Thanks Charles.