Author Topic: 66 washers on water pump  (Read 2754 times)

Offline 66RavenGTCoupe

  • Full Member
  • ***
  • Posts: 230
66 washers on water pump
« on: December 03, 2013, 02:44:52 AM »
Hi all,
There are two thick washers on my 66 water pump and my mechanic can not remember which bolts they should go on. He's completing assembly on Thursday for paint so any help here would be great.

Thanks,

Dan.
66 Metuchen, NJ  GT Coupe
Raven, Deluxe Black Int
6T07A1612##
BODY  COLOR   TRIM    DATE   DSO   AXLE  TRANS
    65B     A      66           02M     22          1     6
Buck Tag:
C/O  362  (Customer Order, Rotation Number)
5    M7 (Weld Bay 5, Bucked Dec 7)
PIO (Performance Image Option - GT)

Offline Herman

  • Jr. Member
  • **
  • Posts: 94
Re: 66 washers on water pump
« Reply #1 on: December 03, 2013, 04:07:53 PM »
Hi Dan

Do you have any photos of the washers to assist everyone with your question.

regards
Herman
Washing, polishing and cleaning stuff some more in an attempt to retain that 'Golden nugget'

Offline 66RavenGTCoupe

  • Full Member
  • ***
  • Posts: 230
Re: 66 washers on water pump
« Reply #2 on: December 03, 2013, 04:59:06 PM »
If you look closely you can see one that is to the right (clockwise) of the fuel line bracket on this 56 mile car. Just wondering where the other one goes now.

Thanks,

Dan.
« Last Edit: December 03, 2013, 05:08:59 PM by 66RavenGTCoupe »
66 Metuchen, NJ  GT Coupe
Raven, Deluxe Black Int
6T07A1612##
BODY  COLOR   TRIM    DATE   DSO   AXLE  TRANS
    65B     A      66           02M     22          1     6
Buck Tag:
C/O  362  (Customer Order, Rotation Number)
5    M7 (Weld Bay 5, Bucked Dec 7)
PIO (Performance Image Option - GT)

Offline jwc66k

  • Hero Member
  • *****
  • Posts: 7348
Re: 66 washers on water pump
« Reply #3 on: December 04, 2013, 12:16:06 AM »
The upper washer is as you determined, the lower washer goes on the place bolt just above the timing mark. It is there but barely visible. For reference, there are two other bolts shown in the picture between the upper and lower bolts that get the washers.   
Jim
I promise to be politically correct in all my posts to keep the BBBB from vociferating.

Offline 66RavenGTCoupe

  • Full Member
  • ***
  • Posts: 230
Re: 66 washers on water pump
« Reply #4 on: December 04, 2013, 01:37:37 AM »
Thanks Jim,
In my research today I had just found out that these washers act as a spacer for non power steering cars. This avoids the need for different length bolts. The two positions mentioned are where the ps bracket would mount and according to the AMK sheet that comes with the bolt kit, the washers should be omitted for a ps installation.
Thanks for your help.
Dan.
66 Metuchen, NJ  GT Coupe
Raven, Deluxe Black Int
6T07A1612##
BODY  COLOR   TRIM    DATE   DSO   AXLE  TRANS
    65B     A      66           02M     22          1     6
Buck Tag:
C/O  362  (Customer Order, Rotation Number)
5    M7 (Weld Bay 5, Bucked Dec 7)
PIO (Performance Image Option - GT)

Offline Brian Conway

  • Hero Member
  • *****
  • Posts: 1623
Re: 66 washers on water pump
« Reply #5 on: December 04, 2013, 03:14:28 PM »
Now that is some interesting and little known stuff.  Looking at my manual steering car the pump seems to have eleven bolts with washers.  Brian
5RO9A GT  4 Spd Built 5/29/65
9TO2R SCJ 4 Spd Built 9/19/68
Owner Driver Mechanic
San Diego, Ca.

Offline J_Speegle

  • Administrator
  • Hero Member
  • *****
  • Posts: 24630
Re: 66 washers on water pump
« Reply #6 on: December 04, 2013, 03:28:12 PM »
Thanks Jim,
In my research today I had just found out that these washers act as a spacer for non power steering cars. This avoids the need for different length bolts...........

+1
Jeff Speegle

Anything worth doing is worth doing concours ;)

Offline 66RavenGTCoupe

  • Full Member
  • ***
  • Posts: 230
Re: 66 washers on water pump
« Reply #7 on: December 04, 2013, 03:57:03 PM »
Now that is some interesting and little known stuff.  Looking at my manual steering car the pump seems to have eleven bolts with washers.  Brian
Hi Brian,
According to the AMK sheet the 3 top bolts and 2 inner bolts are a slotted hex head and have spring washers and the 4 bottom bolts are a flanged head. This is for a 66 no AC with PS car. (Cast pump) Hope this helps.
Dan.
« Last Edit: December 04, 2013, 04:01:21 PM by 66RavenGTCoupe »
66 Metuchen, NJ  GT Coupe
Raven, Deluxe Black Int
6T07A1612##
BODY  COLOR   TRIM    DATE   DSO   AXLE  TRANS
    65B     A      66           02M     22          1     6
Buck Tag:
C/O  362  (Customer Order, Rotation Number)
5    M7 (Weld Bay 5, Bucked Dec 7)
PIO (Performance Image Option - GT)

Offline jwc66k

  • Hero Member
  • *****
  • Posts: 7348
Re: 66 washers on water pump
« Reply #8 on: December 04, 2013, 06:44:42 PM »
From my notes.
Jim
I promise to be politically correct in all my posts to keep the BBBB from vociferating.

Offline 66RavenGTCoupe

  • Full Member
  • ***
  • Posts: 230
Re: 66 washers on water pump
« Reply #9 on: December 04, 2013, 11:55:55 PM »
Great info Jim. Straight into my file!
66 Metuchen, NJ  GT Coupe
Raven, Deluxe Black Int
6T07A1612##
BODY  COLOR   TRIM    DATE   DSO   AXLE  TRANS
    65B     A      66           02M     22          1     6
Buck Tag:
C/O  362  (Customer Order, Rotation Number)
5    M7 (Weld Bay 5, Bucked Dec 7)
PIO (Performance Image Option - GT)