Author Topic: 68 GT 350 leaf springs  (Read 2744 times)

Offline ruppstang

  • Hero Member
  • *****
  • Posts: 3936
68 GT 350 leaf springs
« on: November 13, 2022, 11:20:03 AM »
I am working on a 68 GT 350 convertible 2646 built 03/11/68. At some point the leaf springs were replaced with some D0ZA 5556-G springs (for a Boss 429). I am looking for someone that may have a car built near that date that can tell me what part numbers are on their springs. The MPC lists C7ZA 5556-AL or AM springs. I am looking to buy entire set of original springs or just the bottom leaves. 

Offline Bob Gaines

  • Global Moderator
  • Hero Member
  • ****
  • Posts: 9355
Re: 68 GT 350 leaf springs
« Reply #1 on: November 13, 2022, 11:39:03 AM »
I am working on a 68 GT 350 convertible 2646 built 03/11/68. At some point the leaf springs were replaced with some D0ZA 5556-G springs (for a Boss 429). I am looking for someone that may have a car built near that date that can tell me what part numbers are on their springs. The MPC lists C7ZA 5556-AL or AM springs. I am looking to buy entire set of original springs or just the bottom leaves.
Marty regardless of what the book says I typically see the AR marked springs on competition suspension (Shelby) 68's . As far as the AM marked springs the book calls out I found that early 67 competition suspension cars used AM before changing over to AR shortly after the first of the year 67.
Bob Gaines,Shelby enthusiast, Shelby collector , Shelby concours judge SAAC,MCA,Mid America Shelby

Offline ruppstang

  • Hero Member
  • *****
  • Posts: 3936
Re: 68 GT 350 leaf springs
« Reply #2 on: November 13, 2022, 02:01:09 PM »
Marty regardless of what the book says I typically see the AR marked springs on competition suspension (Shelby) 68's . As far as the AM marked springs the book calls out I found that early 67 competition suspension cars used AM before changing over to AR shortly after the first of the year 67.

Our 68 GT 350 fastback 602 built 12 02-67 has C7ZA 5556-AR springs. I just wanted to check and see if the AR springs were used throughout the production. Am I correct in assuming that same springs were used on both Shelby fastbacks and convertibles?

Offline Bob Gaines

  • Global Moderator
  • Hero Member
  • ****
  • Posts: 9355
Re: 68 GT 350 leaf springs
« Reply #3 on: November 13, 2022, 07:27:56 PM »
Our 68 GT 350 fastback 602 built 12 02-67 has C7ZA 5556-AR springs. I just wanted to check and see if the AR springs were used throughout the production. Am I correct in assuming that same springs were used on both Shelby fastbacks and convertibles?
Yes AR springs were typical throughout 68 production. Yes the AR springs were used on both 68 fastbacks and convertibles .
Bob Gaines,Shelby enthusiast, Shelby collector , Shelby concours judge SAAC,MCA,Mid America Shelby

Offline ruppstang

  • Hero Member
  • *****
  • Posts: 3936
Re: 68 GT 350 leaf springs
« Reply #4 on: November 14, 2022, 09:14:38 AM »
Thank You Bob.

Now to find some AR springs.

Offline Bob Gaines

  • Global Moderator
  • Hero Member
  • ****
  • Posts: 9355
Re: 68 GT 350 leaf springs
« Reply #5 on: November 14, 2022, 11:25:10 AM »
Thank You Bob.

Now to find some AR springs.
Those Boss springs come up for sale more seldom then the AR springs.
Bob Gaines,Shelby enthusiast, Shelby collector , Shelby concours judge SAAC,MCA,Mid America Shelby

Offline preaction

  • Hero Member
  • *****
  • Posts: 1330
Re: 68 GT 350 leaf springs
« Reply #6 on: November 14, 2022, 02:30:33 PM »
68 CJ Mustangs also used the AR rear springs.
8F02R218047-  July 18 1968   Dearborn