Author Topic: C6 Kickdown Cable  (Read 533 times)

Offline Anghelrestorations

  • Hero Member
  • *****
  • Posts: 1193
    • Anghel Restorations
C6 Kickdown Cable
« on: September 15, 2022, 01:05:13 PM »
Wondering if anyone out there has a photo or some documentation that shows the way a kickdown cable is installed on a 67 GTA.  This is for a C6 with a 390 engine. 
Original owner had changed the carb and installed a kickdown rod and changed everything so putting it all back to original.  I assume there is a return spring but cant verify that. 

2022-09-15_9-01-12 by Marcus Anghel, on Flickr
Marcus Anghel
MCA National Gold Card Judge, 69-71 Mustang
SAAC National Head Judge, Boss Mustangs

www.anghelrestorations.com
www.facebook.com/anghelrestorations
www.instagram.com/anghelrestorations

Offline Bob Gaines

  • Global Moderator
  • Hero Member
  • ****
  • Posts: 9362
Re: C6 Kickdown Cable
« Reply #1 on: September 15, 2022, 03:41:25 PM »
Wondering if anyone out there has a photo or some documentation that shows the way a kickdown cable is installed on a 67 GTA.  This is for a C6 with a 390 engine. 
Original owner had changed the carb and installed a kickdown rod and changed everything so putting it all back to original.  I assume there is a return spring but cant verify that. 

2022-09-15_9-01-12 by Marcus Anghel, on Flickr
Return spring is in the posted picture.
Bob Gaines,Shelby enthusiast, Shelby collector , Shelby concours judge SAAC,MCA,Mid America Shelby

Offline jwc66k

  • Hero Member
  • *****
  • Posts: 7346
Re: C6 Kickdown Cable
« Reply #2 on: September 15, 2022, 07:32:24 PM »
Wondering if anyone out there has a photo or some documentation that shows the way a kickdown cable is installed on a 67 GTA.  This is for a C6 with a 390 engine. 
Original owner had changed the carb and installed a kickdown rod and changed everything so putting it all back to original.  I assume there is a return spring but cant verify that. 

2022-09-15_9-01-12 by Marcus Anghel, on Flickr
The installation is shown in the "1967 Mustang Chassis Assembly Manual" (AM0020) pg41. There is an error in two of the "View Z's". Swap the application stating "For 289-4V Carb" and "For 390-4V Carb". The "View Z for 289-2V Carb" is correct.
(Note to Cougar owners: The manual referenced above also has Cougar pages.)
Jim
I promise to be politically correct in all my posts to keep the BBBB from vociferating.

Offline Anghelrestorations

  • Hero Member
  • *****
  • Posts: 1193
    • Anghel Restorations
Re: C6 Kickdown Cable
« Reply #3 on: September 16, 2022, 02:14:37 AM »
Thanks guys!  The picture and the assembly manual help out alot....I see now how things are put together with the cable and the return spring now. 
Marcus Anghel
MCA National Gold Card Judge, 69-71 Mustang
SAAC National Head Judge, Boss Mustangs

www.anghelrestorations.com
www.facebook.com/anghelrestorations
www.instagram.com/anghelrestorations

Offline preaction

  • Hero Member
  • *****
  • Posts: 1330
Re: C6 Kickdown Cable
« Reply #4 on: September 16, 2022, 06:33:59 PM »
The spring retaining clip is a tough part to locate.
8F02R218047-  July 18 1968   Dearborn

Offline jwc66k

  • Hero Member
  • *****
  • Posts: 7346
Re: C6 Kickdown Cable
« Reply #5 on: September 16, 2022, 07:38:45 PM »
The spring retaining clip is a tough part to locate.
"Clip" or "bracket"?
Jim
I promise to be politically correct in all my posts to keep the BBBB from vociferating.

Offline preaction

  • Hero Member
  • *****
  • Posts: 1330
Re: C6 Kickdown Cable
« Reply #6 on: September 17, 2022, 02:01:49 PM »
Springie bracket  ;)
8F02R218047-  July 18 1968   Dearborn

Offline jwc66k

  • Hero Member
  • *****
  • Posts: 7346
Re: C6 Kickdown Cable
« Reply #7 on: September 17, 2022, 04:20:27 PM »
Springie bracket  ;)
I'm sorry. That word does not appeal in my Funk and Wagnalls Encyclopedia.  :(
I promise to be politically correct in all my posts to keep the BBBB from vociferating.