Topic: Correct PS Pump & Fittings

[duffman]

I just pulled the PS pump from my 390 GT.
The plate on the back  reads "HBA  BF 
                                                IF"    and several numbers that are indiscernible.
Behind the plate is unpainted.
I believe it is correct as per this and other sites.
It is a dark blue, with no signs of repaint, as the tag has bare metal behind it.
What is the correct hose for the lower fitting?

Chris

[RoyceP]

The lower fitting is for the unpressurized return hose. On a big block (you have the correct reservoir for a 390) the lower connection would have a piece of plain rubber 3/8" ID hose that would clamp to the nipple using a factory band clamp. It would go next to the oil filter and terminate at the manufactured hose clamped in the bracket below the lower A - arm. At that juncture it is secured by another identical Ford factory band clamp.


The hose is smooth and has no markings.

[duffman]

Thank you!  Thats one thing I dont have to replace!
Any good source for the hose and correct clamps?  Pulled a Worm gear clamp off.