Author Topic: 69 Shelby side scoops  (Read 2116 times)

Offline 67gta289

  • Hero Member
  • *****
  • Posts: 3080
69 Shelby side scoops
« on: August 08, 2021, 02:09:48 PM »
Do these 69 Shelby side scoops look to be original?  There are no markings that I can see.  TIA  John
John
67 289 GTA Dec 20 1966 San Jose
7R02C156xxx
MCA 74660

Offline 69GT350H

  • Hero Member
  • *****
  • Posts: 696
  • 1 of 10 Hertz Rentals from Miami Int Airport
    • RedsHost is my private forum and photo gallery site
Re: 69 Shelby side scoops
« Reply #1 on: August 08, 2021, 04:24:35 PM »
They look to be missing the rear brackets that they slip over to hold them to the body on the inner back area. One of mine was broken and someone drilled through it to insert a screw.

http://www.redshost.com/gt350/imgpages/image1310.html -through- http://www.redshost.com/gt350/imgpages/image1316.html
Accurate looking but not a Concours Restoration/build. See my build photo gallery at 69GT350 Hertz Build

Offline 67gta289

  • Hero Member
  • *****
  • Posts: 3080
Re: 69 Shelby side scoops
« Reply #2 on: August 08, 2021, 04:39:41 PM »
Thanks for the reference pics.  I don't see any evidence of the missing clips.
John
67 289 GTA Dec 20 1966 San Jose
7R02C156xxx
MCA 74660

Offline Bob Gaines

  • Global Moderator
  • Hero Member
  • ****
  • Posts: 9369
Re: 69 Shelby side scoops
« Reply #3 on: August 08, 2021, 04:56:04 PM »
The two rear fasteners didn't hold particularly well on their own so AO Smith typically also added double sided tape around the perimeter to add more holding power.
Bob Gaines,Shelby enthusiast, Shelby collector , Shelby concours judge SAAC,MCA,Mid America Shelby

Offline shelby clone

  • Newbie
  • *
  • Posts: 32
Re: 69 Shelby side scoops
« Reply #4 on: August 11, 2021, 12:57:44 PM »
are you selling them or know of where to find a drivers side scoop?? i have the brackets and mounting clips!thanks

Offline penmanb

  • Newbie
  • *
  • Posts: 4
Re: 69 Shelby side scoops
« Reply #5 on: August 25, 2021, 08:44:46 PM »
I have the scoops and the clips that attach to the quarter panels.  I don?t have the brackets that are on the inside of the scoops.  Does anyone know where I can get these?  Or have a good closeup so I can make my own?
Please and Thanks
Bruce