Author Topic: C6 intake on a 65 A code?  (Read 1035 times)

Offline KevinK

  • Hero Member
  • *****
  • Posts: 560
C6 intake on a 65 A code?
« on: May 22, 2021, 09:56:48 PM »
I was looking at a 65 A code coupe for a friend It was a May/June SJ car. Was this correct or added by someone?
Also was there a left side remote mirror with the control low on the door panel? I see a repro version now.

Thanks
« Last Edit: May 23, 2021, 01:30:37 AM by KevinK »
MCA #33800, Gold Card 3rd Gen
BAMA Member
67 Coupe, 69 Coupe, 74 Coupe, 84 SVO, 84 GT Turbo, 86 GT, 88 McLaren, 89 LX Sport, 03 Mach 1, 07 GT500, 14 GT/CS

Offline jwc66k

  • Hero Member
  • *****
  • Posts: 7348
Re: C6 intake on a 65 A code?
« Reply #1 on: May 23, 2021, 12:17:22 AM »
Possible, but not probable. Check the engine assembly date (see picture). That may give more info about the manifold.
Jim
I promise to be politically correct in all my posts to keep the BBBB from vociferating.

Offline KevinK

  • Hero Member
  • *****
  • Posts: 560
Re: C6 intake on a 65 A code?
« Reply #2 on: May 23, 2021, 01:15:13 AM »
Thanks Jim. I did not think of looking there.

Do you know of any nice driver quality 65/66 cars for sale in the area? Helping a friend look for a car.
« Last Edit: May 23, 2021, 01:17:55 AM by KevinK »
MCA #33800, Gold Card 3rd Gen
BAMA Member
67 Coupe, 69 Coupe, 74 Coupe, 84 SVO, 84 GT Turbo, 86 GT, 88 McLaren, 89 LX Sport, 03 Mach 1, 07 GT500, 14 GT/CS

Offline CharlesTurner

  • Charles Turner
  • Administrator
  • Hero Member
  • *****
  • Posts: 7688
Re: C6 intake on a 65 A code?
« Reply #3 on: May 23, 2021, 01:25:52 AM »
Yes, some late 65's had that.  Check the date casting.
Charles Turner - MCA/SAAC Judge
Concours Mustang Forum Admin

Offline relicdog

  • Newbie
  • *
  • Posts: 9
Re: C6 intake on a 65 A code?
« Reply #4 on: May 23, 2021, 08:38:12 PM »
My mid. June built k- Code has a C6 intake , the casting date is 5E12, If I remember correctly the intakes for late
65 Kars ,will have a C stamped on the machined boss area in front of casting number.

Relicdog



Offline steve_f

  • Jr. Member
  • **
  • Posts: 58
Re: C6 intake on a 65 A code?
« Reply #5 on: June 08, 2021, 11:01:07 AM »
My May 15, 65 A-code SJ GT fastback has a C6 intake on it. I believe that the change over is mentioned in Bob Mannel's book (which I don't have with me right now.) I questioned the same thing when I got my car 15 years ago.
Steve
« Last Edit: June 08, 2021, 11:03:26 AM by steve_f »
Steve
1965 (15S) San Jose Mustang GT Fastback (sold)

Offline jwc66k

  • Hero Member
  • *****
  • Posts: 7348
Re: C6 intake on a 65 A code?
« Reply #6 on: June 08, 2021, 02:36:00 PM »
I believe that the change over is mentioned in Bob Mannel's book -
Per Mannel - page 5-17 (5C2 f) and section E-7, notes 9 and 10. I didn't find a specific date.
Jim
I promise to be politically correct in all my posts to keep the BBBB from vociferating.

Offline petersixtfive

  • Full Member
  • ***
  • Posts: 126
Re: C6 intake on a 65 A code?
« Reply #7 on: June 09, 2021, 04:46:32 AM »
A spare intake I have confirming the casting dates in question
Regards
Peter
65 SJ GT fastback June 65 Build