« previous next »
Pages: [1]   Go Down

Author Topic: 70 Mach 1 Exhaust Tip Protrusion  (Read 664 times)

Offline 1970 Snake

  • Sr. Member
  • ****
  • Posts: 424
70 Mach 1 Exhaust Tip Protrusion
« on: March 18, 2021, 06:00:51 PM »
Can anyone advise what the correct amount of protrusion is for the chrome oval exhaust tips on a 1970 Mach 1, from the top of the rear valance panel notch to the top end of the chrome tip. The Osborne chassis manual defines the clearance between the tip and the valance .380 minimum all round, but no extension amount past the end of the valance. Any help would be great, thanks.
Logged
Dearborn Built Sept 4, 1969
1970 Mach1 428 CJ R-Code C6
Calypso Coral, White Deluxe Interior
dash tach, front bumperettes
Marti report one of one with delay wipers

Offline Brian Conway

  • Hero Member
  • *****
  • Posts: 1623
Re: 70 Mach 1 Exhaust Tip Protrusion
« Reply #1 on: March 18, 2021, 10:16:27 PM »
FWIW; I suggest you use the dimples in your tips as a reference.  The dimples should be roughly in line with the lower valance cut outs. Brian
Logged
5RO9A GT  4 Spd Built 5/29/65
9TO2R SCJ 4 Spd Built 9/19/68
Owner Driver Mechanic
San Diego, Ca.
Pages: [1]   Go Up
« previous next »