« previous next »
Pages: [1]   Go Down

Author Topic: 63-67 Hi-Po 289 Main Cap Bearing Bolts  (Read 754 times)

Offline Bossbill

  • Hero Member
  • *****
  • Posts: 3283
  • In the middle of project hell
63-67 Hi-Po 289 Main Cap Bearing Bolts
« on: May 11, 2020, 02:46:20 PM »
More weird stuff from the parts closet.

The on the left is one I've seen in Hi-Po engines. But it's not like I've seen dozens of lower ends exposed.

A long time ago I procured some Main Cap Bolts (C2OZ-6345-A). These bolts have  paint or other weird finish on the stem. It rubs off.
But the bolt heads are a bit different. I'm more used to the version on the left. But the versions packaged in these boxes in the version on the right. Both have "FB" embossed on the head rather than the "F" I've found on regular 289s.
Logged
Bill
Concours  Actual Ford Build 3/2/67 GT350 01375
Driven      6/6/70 0T02G160xxx Boss 302
Modified   5/18/65 5F09A728xxx Boss 347 Terminator-X 8-Stack
Race        65 2+2 Coupe conversion

Offline jwc66k

  • Hero Member
  • *****
  • Posts: 7346
Re: 63-67 Hi-Po 289 Main Cap Bearing Bolts
« Reply #1 on: May 11, 2020, 04:44:44 PM »
Ford leads the way - again. I found a couple of "FB" head markings in my C2OZ-6345-B pile (3 29/32 in), but with the standard 6 lines at 60 degrees for grade 8. Just wanted to add to the confusion.
Jim
Logged
I promise to be politically correct in all my posts to keep the BBBB from vociferating.
Pages: [1]   Go Up
« previous next »