Topic: 69 vs 70 doors

[JohnRB]

Anyone have a side by side pic with the differences between the 69 and 70 door inner structure?

Thanks

John

[Armond]

The 70's don't have door tag holes and at the bottom corners they made a change for the Mach trim.  Notice in the picture of one corner I repaired a rust issue the other day, on a 70 door, they made a bend in the inner structure for a hole for the stud to come thru.  Front and rear. 

[Brian Conway]

Not clear on what ' door inner structure ' means ?  This picture is of a 69 door without the 70 stud provision Armond pictured.  Something specific you are looking for ? Brian

[JohnRB]

The 70's don't have door tag holes and at the bottom corners they made a change for the Mach trim.  Notice in the picture of one corner I repaired a rust issue the other day, on a 70 door, they made a bend in the inner structure for a hole for the stud to come thru.  Front and rear.

Just found out the same thing after looking at several 69/70 Mustangs.

Thanks for confirming it.

John

[J_Speegle]

Another picture showing the difference.

The most visible difference between 69 and 70 doors is the inner shell/panel in the lower corner where, during 70 production, they reshaped this area to provide a more solid attachment point for the exterior Mach I trim.

A picture to illustrate. In the 70 example you can see that there is a section of that inner shell that had to be reshaped and for Mach I's a hole drilled. Hope this helps others in their understanding of these differences

[Vcode]

Here's Marcus's door article.

http://anghelrestorations.com/uploads/3/5/1/2/35122002/1969_1970_doors_v1.1.pdf