Author Topic: 68 rocker molding option?  (Read 555 times)

Offline ruppstang

  • Hero Member
  • *****
  • Posts: 3907
68 rocker molding option?
« on: December 22, 2019, 03:07:44 PM »
I ran across this picture of a 68 coupe towing a trailer in the 68 Mustang option sales catalog. I noticed that it was with out rocker moldings which surprised me because rocker moldings are on the 68 Mustang list of standard equipment. I realize the rocker molding were optional in 67. Possibly this catalog was printed before the 68 list of standard equipment was finalized.

BTW I ran a cross a NOS trailer towing kit. I thought it would be fun to have but not on our cars.

Offline J_Speegle

  • Administrator
  • Hero Member
  • *****
  • Posts: 24526
Re: 68 rocker molding option?
« Reply #1 on: December 24, 2019, 12:28:43 AM »
Think you'll find that the cars used (like in the film strips, some early ads and so on) are the preproduction and late styling cars and can often have a number of not RPO details

Over the years have seen a few cars at shows with the dealer rear tow package. Most of the time it was on one of those you see where the owner loaded up the car to stand out. Sure many of us have also found the evidence  of the hitch - holes drilled and not always patched in the body, bumper and so on depending on the style
Jeff Speegle

Anything worth doing is worth doing concours ;)

Offline 67gta289

  • Hero Member
  • *****
  • Posts: 3072
Re: 68 rocker molding option?
« Reply #2 on: December 24, 2019, 07:45:59 AM »
A trailer package on my Mustang would be like....a hitch in my giddy up  8)
John
67 289 GTA Dec 20 1966 San Jose
7R02C156xxx
MCA 74660

Offline ruppstang

  • Hero Member
  • *****
  • Posts: 3907
Re: 68 rocker molding option?
« Reply #3 on: December 24, 2019, 09:46:18 AM »
A trailer package on my Mustang would be like....a hitch in my giddy up  8)

We have a older lady in our local club that bought a new 69 428 Mach 1 and had a trailer hitch for their camper installed. They pulled it from Nebraska to Alaska and back. She said you could hardly tell it was back there. LOL maybe you have the wrong engine!

Offline Bossbill

  • Hero Member
  • *****
  • Posts: 3271
  • In the middle of project hell
Re: 68 rocker molding option?
« Reply #4 on: December 24, 2019, 02:33:41 PM »
My Shelby was owned by Col. Pearson, who raced Cobras back in the 70s and 80s.
He decided a 4 speed GT350 would be just the ticket to tow his Cobra and half a dozen other Cobra race cars to Road Atlanta.
A trailer hitch was installed on the Shelby and it became his tow truck for a number of years.
I carried on a correspondence with him in which he documented the Cobras he towed.

Just a different frame of mind back then.
Bill
Concours  Actual Ford Build 3/2/67 GT350 01375
Driven      6/6/70 0T02G160xxx Boss 302
Modified   5/18/65 5F09A728xxx Boss 347 Terminator-X 8-Stack
Race        65 2+2 Coupe conversion