« previous next »
Pages: [1]   Go Down

Author Topic: 65-66 front crossmember / support  (Read 1104 times)

Offline Hipo giddyup

  • Hero Member
  • *****
  • Posts: 1207
  • There is no end to doing right. Giddyup!!!
65-66 front crossmember / support
« on: April 26, 2019, 10:42:29 AM »
 I recently picked up a very nice front crossmember at a local swap meet (the support that goes under the oilpan to both frame rails.). It could possibly be NOS but my question pertains to a "dent" (for a lack of better words) on one side of the crossmember. This does not appear to have been done by a jack as it is on part of the angle tube and the paint over this area is near perfect leading me to believe it was this was from the factory. I have had two other guys tell me they have seen this before and thought it was "dented" to clear PS components??? Any input would be appreciated. (I will submit a pic later today)

Logged
1967 Springtime Yellow Coupe, 289 2v 3spd, Metuchen built, Nov. 17th 66'
1966 Sahara Beige Coupe, 289 2v 3spd, Dearborn built, July 21st 66'
1964 1/2 Pagoda Green Coupe, 260 2v 3spd, Dearborn built, June 30th 64'
1966 GT350 Fastback clone, 289 HiPo, 725cfm Holley, 4spd, SanJose built, Nov 25th 65'

Offline carlite65

  • Global Moderator
  • Hero Member
  • ****
  • Posts: 2411
Re: 65-66 front crossmember / support
« Reply #1 on: April 26, 2019, 10:43:48 AM »
yes you were told correctly. it is to clear the p.s. control valve.
Logged
5F09C331248

Offline Bob Gaines

  • Global Moderator
  • Hero Member
  • ****
  • Posts: 9369
Re: 65-66 front crossmember / support
« Reply #2 on: April 26, 2019, 11:37:41 AM »
Quote from: carlite65 on April 26, 2019, 10:43:48 AM
yes you were told correctly. it is to clear the p.s. control valve.
+1 . also 65/66 and 67-70 style crossmember. I will let Jeff post pictures (I bet he sees this  ;)) . I am away from my picture file.
« Last Edit: April 26, 2019, 11:40:01 AM by Bob Gaines »
Logged
Bob Gaines,Shelby enthusiast, Shelby collector , Shelby concours judge SAAC,MCA,Mid America Shelby

Offline Hipo giddyup

  • Hero Member
  • *****
  • Posts: 1207
  • There is no end to doing right. Giddyup!!!
Re: 65-66 front crossmember / support
« Reply #3 on: April 27, 2019, 10:46:56 PM »
Here is a pic. And another of the FoMoCo stamping.
Logged
1967 Springtime Yellow Coupe, 289 2v 3spd, Metuchen built, Nov. 17th 66'
1966 Sahara Beige Coupe, 289 2v 3spd, Dearborn built, July 21st 66'
1964 1/2 Pagoda Green Coupe, 260 2v 3spd, Dearborn built, June 30th 64'
1966 GT350 Fastback clone, 289 HiPo, 725cfm Holley, 4spd, SanJose built, Nov 25th 65'

Offline CharlesTurner

  • Charles Turner
  • Administrator
  • Hero Member
  • *****
  • Posts: 7688
Re: 65-66 front crossmember / support
« Reply #4 on: April 28, 2019, 11:52:14 AM »
The FoMoCo stamp is usually seen on later cars, maybe starting in 67/68.
Logged
Charles Turner - MCA/SAAC Judge
Concours Mustang Forum Admin

Offline Hipo giddyup

  • Hero Member
  • *****
  • Posts: 1207
  • There is no end to doing right. Giddyup!!!
Re: 65-66 front crossmember / support
« Reply #5 on: April 29, 2019, 09:10:39 AM »
Didn't realize that. Thanks Charles!
Logged
1967 Springtime Yellow Coupe, 289 2v 3spd, Metuchen built, Nov. 17th 66'
1966 Sahara Beige Coupe, 289 2v 3spd, Dearborn built, July 21st 66'
1964 1/2 Pagoda Green Coupe, 260 2v 3spd, Dearborn built, June 30th 64'
1966 GT350 Fastback clone, 289 HiPo, 725cfm Holley, 4spd, SanJose built, Nov 25th 65'

Offline Bob Gaines

  • Global Moderator
  • Hero Member
  • ****
  • Posts: 9369
Re: 65-66 front crossmember / support
« Reply #6 on: April 29, 2019, 03:29:46 PM »
Can you post a picture showing the entire front crossmember profile . Laying on it's side for example on the floor. That way it will be easy to determine which one you have 65/66 or 67-70 instead of guessing from the limited picture views.
Logged
Bob Gaines,Shelby enthusiast, Shelby collector , Shelby concours judge SAAC,MCA,Mid America Shelby

Offline Bossbill

  • Hero Member
  • *****
  • Posts: 3283
  • In the middle of project hell
Re: 65-66 front crossmember / support
« Reply #7 on: April 29, 2019, 08:35:27 PM »
Great. Now you have me second guessing which I restored and painted.

Here are the two different versions.

Logged
Bill
Concours  Actual Ford Build 3/2/67 GT350 01375
Driven      6/6/70 0T02G160xxx Boss 302
Modified   5/18/65 5F09A728xxx Boss 347 Terminator-X 8-Stack
Race        65 2+2 Coupe conversion

Offline Bob Gaines

  • Global Moderator
  • Hero Member
  • ****
  • Posts: 9369
Re: 65-66 front crossmember / support
« Reply #8 on: April 30, 2019, 12:10:19 AM »
Quote from: Bossbill on April 29, 2019, 08:35:27 PM
Great. Now you have me second guessing which I restored and painted.

Here are the two different versions.
The one on the left is 65/66 and the one on the right is 67-70.
Logged
Bob Gaines,Shelby enthusiast, Shelby collector , Shelby concours judge SAAC,MCA,Mid America Shelby

Offline 67gtasanjose

  • Hero Member
  • *****
  • Posts: 5093
  • "Take the MUSTANG PLEDGE"
Re: 65-66 front crossmember / support
« Reply #9 on: April 30, 2019, 06:04:03 AM »
Quote from: Bossbill on April 29, 2019, 08:35:27 PM
Great. Now you have me second guessing which I restored and painted.

Here are the two different versions.
Quote from: Bob Gaines on April 30, 2019, 12:10:19 AM
The one on the left is 65/66 and the one on the right is 67-70.
Bill must have my same sort of luck...misery loves company.
Logged
Richard Urch

1967 (11/2/66, S.J.) GTA Luxury Coupe, 289-4V w/Thermactor Emissions, C-4, Int./Ext. Decor +many options

2005 (04/05) GT Premium Convertible, Windveil Blue, Parchment Top w/Med. Parchment interior,  Roush Body Appointments

Offline Bossbill

  • Hero Member
  • *****
  • Posts: 3283
  • In the middle of project hell
Re: 65-66 front crossmember / support
« Reply #10 on: April 30, 2019, 01:21:05 PM »
Sigh ...
Wrong shelf, wrong crossmember.
Must be one of the few items on which I didn't hang a plastic tag. 

But this 65-66 crossmember did have the square FoMoCo. And it's real pretty.
Logged
Bill
Concours  Actual Ford Build 3/2/67 GT350 01375
Driven      6/6/70 0T02G160xxx Boss 302
Modified   5/18/65 5F09A728xxx Boss 347 Terminator-X 8-Stack
Race        65 2+2 Coupe conversion

Offline Hipo giddyup

  • Hero Member
  • *****
  • Posts: 1207
  • There is no end to doing right. Giddyup!!!
Re: 65-66 front crossmember / support
« Reply #11 on: May 02, 2019, 04:09:04 PM »
Here is mine. Looks like the 67-68 variant?
Logged
1967 Springtime Yellow Coupe, 289 2v 3spd, Metuchen built, Nov. 17th 66'
1966 Sahara Beige Coupe, 289 2v 3spd, Dearborn built, July 21st 66'
1964 1/2 Pagoda Green Coupe, 260 2v 3spd, Dearborn built, June 30th 64'
1966 GT350 Fastback clone, 289 HiPo, 725cfm Holley, 4spd, SanJose built, Nov 25th 65'

Offline Bob Gaines

  • Global Moderator
  • Hero Member
  • ****
  • Posts: 9369
Re: 65-66 front crossmember / support
« Reply #12 on: May 02, 2019, 04:47:24 PM »
Quote from: Hipo giddyup on May 02, 2019, 04:09:04 PM
Here is mine. Looks like the 67-68 variant?
It matches the other picture alright.
Logged
Bob Gaines,Shelby enthusiast, Shelby collector , Shelby concours judge SAAC,MCA,Mid America Shelby
Pages: [1]   Go Up
« previous next »