« previous next »
Pages: [1]   Go Down

Author Topic: Yellow top coil molded ID number  (Read 744 times)

Offline Hipo giddyup

  • Hero Member
  • *****
  • Posts: 1207
  • There is no end to doing right. Giddyup!!!
Yellow top coil molded ID number
« on: July 04, 2019, 12:43:58 PM »
 I just cleaned up and repainted three yellow top coils I recently purchased. I’m curious about the number that’s molded into the yellow top itself. Please see attached pics, I am unsure what these numbers and letters represent.  The numbers I am seeing are 6D, 4D, and 2A. Couldn’t find much in the search here, hopefully someone will chime in.  ;D
Logged
1967 Springtime Yellow Coupe, 289 2v 3spd, Metuchen built, Nov. 17th 66'
1966 Sahara Beige Coupe, 289 2v 3spd, Dearborn built, July 21st 66'
1964 1/2 Pagoda Green Coupe, 260 2v 3spd, Dearborn built, June 30th 64'
1966 GT350 Fastback clone, 289 HiPo, 725cfm Holley, 4spd, SanJose built, Nov 25th 65'

Online jwc66k

  • Hero Member
  • *****
  • Posts: 7306
Re: Yellow top coil molded ID number
« Reply #1 on: July 04, 2019, 12:57:47 PM »
Those are mold numbers. The only date code is the stamp.
Jim
Logged
I promise to be politically correct in all my posts to keep the BBBB from vociferating.

Offline Hipo giddyup

  • Hero Member
  • *****
  • Posts: 1207
  • There is no end to doing right. Giddyup!!!
Re: Yellow top coil molded ID number
« Reply #2 on: July 04, 2019, 01:03:47 PM »
Ah, so nothing connected to the date code itself. Thanks Jim!
Logged
1967 Springtime Yellow Coupe, 289 2v 3spd, Metuchen built, Nov. 17th 66'
1966 Sahara Beige Coupe, 289 2v 3spd, Dearborn built, July 21st 66'
1964 1/2 Pagoda Green Coupe, 260 2v 3spd, Dearborn built, June 30th 64'
1966 GT350 Fastback clone, 289 HiPo, 725cfm Holley, 4spd, SanJose built, Nov 25th 65'

Offline J_Speegle

  • Administrator
  • Hero Member
  • *****
  • Posts: 24526
Re: Yellow top coil molded ID number
« Reply #3 on: July 04, 2019, 03:22:11 PM »
Agreed that at one time there was thought that they meant something we could use but over time and cross checking with the printed date and looking for patterns nothing tangible was discovered so the mold number seemed the best explanation
Logged
Jeff Speegle

Anything worth doing is worth doing concours ;)
Pages: [1]   Go Up
« previous next »