Author Topic: 70 BOSS 302 POWER STEERING SPACER at head finish  (Read 2113 times)

Offline app01

  • Full Member
  • ***
  • Posts: 186
    • Make Your Car Stand Out with A Custom Showboard from
70 BOSS 302 POWER STEERING SPACER at head finish
« on: March 27, 2013, 12:08:04 PM »
May 70 Dearborn Boss 302

The MCA rules, section R, state that the power steering spacer that is between the pump bracket and head is natural Aluminum. All of the ones that I have seen (that I think are original) are steel with what appears to be a black phosphate  finish. Also the only repop ones  I have seen are steel with black phosphate.

Can someone please confirm what the material and finish is?

Thanks again,
Tony
« Last Edit: March 27, 2013, 12:09:53 PM by app01 »
Currently own:
1970 Boss 302 - Yellow- May 1970, Dearborn
1970 Mach 1 -Sept 1969, Metuchen
1962 Corvette 340hp

Previously Owned:
1967 Mustang Convertible (My 1st car)
1970 Mach 1 (my 2nd car)
1989 GT
1969 Mach 1 (<29k miles, Unrestored, MCA Gold)-sold in 2012

MCA #62598

www.PalmieriConcepts.com

Offline app01

  • Full Member
  • ***
  • Posts: 186
    • Make Your Car Stand Out with A Custom Showboard from
Re: 70 BOSS 302 POWER STEERING SPACER at head finish
« Reply #1 on: August 10, 2018, 01:54:35 PM »
I am going through a bunch of final details on my boss and  while searching I realized that I never confirmed this question years ago. The 2018 Rules Boss rules still indicate this as being Aluminum.

Thoughts on the material and finish?

Thanks again, Tony
« Last Edit: August 10, 2018, 02:31:20 PM by app01 »
Currently own:
1970 Boss 302 - Yellow- May 1970, Dearborn
1970 Mach 1 -Sept 1969, Metuchen
1962 Corvette 340hp

Previously Owned:
1967 Mustang Convertible (My 1st car)
1970 Mach 1 (my 2nd car)
1989 GT
1969 Mach 1 (<29k miles, Unrestored, MCA Gold)-sold in 2012

MCA #62598

www.PalmieriConcepts.com

Offline J_Speegle

  • Administrator
  • Hero Member
  • *****
  • Posts: 24578
Re: 70 BOSS 302 POWER STEERING SPACER at head finish
« Reply #2 on: August 10, 2018, 07:54:48 PM »
Appear to be bare steel like other similar spacers. Number of pictures I have show rusty exterior surface on those.
Jeff Speegle

Anything worth doing is worth doing concours ;)

Offline app01

  • Full Member
  • ***
  • Posts: 186
    • Make Your Car Stand Out with A Custom Showboard from
Re: 70 BOSS 302 POWER STEERING SPACER at head finish
« Reply #3 on: August 11, 2018, 07:14:00 AM »
Thank you for confirming that Jeff.
Currently own:
1970 Boss 302 - Yellow- May 1970, Dearborn
1970 Mach 1 -Sept 1969, Metuchen
1962 Corvette 340hp

Previously Owned:
1967 Mustang Convertible (My 1st car)
1970 Mach 1 (my 2nd car)
1989 GT
1969 Mach 1 (<29k miles, Unrestored, MCA Gold)-sold in 2012

MCA #62598

www.PalmieriConcepts.com