Author Topic: Bumper Questions  (Read 741 times)

Offline must69

  • Full Member
  • ***
  • Posts: 198
Bumper Questions
« on: June 09, 2018, 08:40:51 PM »
I have searched this forum and others concerning rechroming original bumpers vs reproach, and the consensus seems to be heavy in favor of rechroming originals. My original 64-1/2 number is straight and sure needs rechroming.  I found a production date of 6 23 which is good for a July 13 production. The date was stamped in the area where the tag light would be.  The front bumper is is not as quite a good of shape and wondering if rechromers can also straighten them?  I could not find a production date on the front.  Any suggestions where it may be located?  Lastly, any suggestions for a rechromer in the NJ area?
Thanks.
Phil

Offline NEFaurora

  • Hero Member
  • *****
  • Posts: 970
Re: Bumper Questions
« Reply #1 on: June 09, 2018, 11:16:25 PM »
Yes, They can easily straighten them.  It comes free usually with the cost of rechroming...

An Original Ford Factory Front '65-'66 (and 64 1/2) bumper has the date stamped on the bottom of the Driver's Side lower Bumper Tab.  If you can't find any Date Stamp there, chances are the bumper is a replacement (older repro possibly).

See pics below.

« Last Edit: June 09, 2018, 11:19:28 PM by NEFaurora »
Tony Kovar (NEFaurora@aol.com)
1965 Mustang Convertible 200 cid 3spd manual
1966 Mustang Convertible Sprint 200 C4 Auto
2007 Mustang Convertible V6 Auto with "Pony Package".
1966 Mustang Sprint 200 Registry Owner/Moderator
MCA#70001

Offline must69

  • Full Member
  • ***
  • Posts: 198
Re: Bumper Questions
« Reply #2 on: June 09, 2018, 11:19:30 PM »
Thanks for the info and photos.  I looked on the tabs, but more on the inside.  I’ll check again.
Thanks!
Phil

Offline rodster

  • Hero Member
  • *****
  • Posts: 1011
Re: Bumper Questions
« Reply #3 on: June 09, 2018, 11:22:35 PM »
I have searched this forum and others concerning rechroming original bumpers vs reproach, and the consensus seems to be heavy in favor of rechroming originals. My original 64-1/2 number is straight and sure needs rechroming.  I found a production date of 6 23 which is good for a July 13 production. The date was stamped in the area where the tag light would be.  The front bumper is is not as quite a good of shape and wondering if rechromers can also straighten them?  I could not find a production date on the front.  Any suggestions where it may be located?  Lastly, any suggestions for a rechromer in the NJ area?
Thanks.
Phil

Great info here:

http://www.concoursmustang.com/forum/index.php?topic=4519.msg25144#msg25144

and here:

http://blog.virginiaclassicmustang.com/2012/02/just-detailsmustang-bumper-date.html
1965 Dearborn Mustang Coupe
Raven Black - Palomino Pony
1967 Dearborn Mustang Conv.
Wimbeldon White - Red
1984 SVO - 2A

Offline J_Speegle

  • Administrator
  • Hero Member
  • *****
  • Posts: 24630
Re: Bumper Questions
« Reply #4 on: June 10, 2018, 11:05:33 PM »
Date coding and examples of locations of many are included in the decoding date markings article located in the sites Library also ;)
Jeff Speegle

Anything worth doing is worth doing concours ;)