Topic: Need an I6 6cyl Emergency Brake Shoe Bar PIN (Used Original)..

[NEFaurora]

Subject: Need an I6 6cyl Emergency Brake Shoe Bar PIN (Used Original)..  What I need here is the Small 1" inch long Steel Pin that secures the I6 Rear Emergency Brake bar to the Rear Brake shoe. It is usually secured with a small bendable "U" clip and friction washer.   I just need a good Used Original Rear PIN for the Rear Brakes...It holds the Emergency Brake cable bar to the Rear Brake shoe. 

E-mail me at NEFaurora@aol.com if you have one or more that you can part with and what you want for it...

Thanks,  Tony K.   )

[NEFaurora]

PS: I think the technical name for the pin(s) is the "Parking Brake Lever Pivot Pin" to be more correct....

Is the I6 pin the same as the V8 pin?

Got one??

)

Tony K.

[67gta289]

I might.  What part# do you have for the V8?  Also a pic of what you are looking for will help.

[Bossbill]

I had the MPC open . . .

If you are referring to the lever (which includes the pin).
it's a  "2A637-8 Lever Parking Brake Cable to Secondary Brake Shoe".

Looks like I6 and V8 are the same but they are different by drum sizes.
10" brakes are C9ZZ-2A637-A /  C9ZZ-2A638-A (RH/LH)
9" brakes are C9ZZ-2A637-B / C9ZZ-2A638-B (RH/LH)

A length of the item might help here.

[Andrew@MagMustangs]

The 10" brake lever on V8 cars did not have a separate pin like the 9" brake lever on 6 cylinder cars.

[NEFaurora]

Here's a pic...!!  I found one in my garage...but I'd still like to find a source/supplier of these for the future...for I6 cars.

Sorry, but I forgot to measure it before I installed it today...

)

Tony K.