Author Topic: '66 quarter panel drain location vs. '67  (Read 1689 times)

Offline socalgt

  • Hero Member
  • *****
  • Posts: 548
'66 quarter panel drain location vs. '67
« on: August 15, 2016, 06:53:13 PM »
Am I correct that '66 quarter panel drains were on the bottom of the actual quarter panel, as opposed to the '67 having it mounted vertically, in the small square hole in the trunk drop off panel?
« Last Edit: August 15, 2016, 07:32:34 PM by socalgt »

Offline midlife

  • Wiring Guru---let me check your shorts!
  • Global Moderator
  • Hero Member
  • ****
  • Posts: 2174
    • Midlife Harness Restorations
Re: '66 quarter panel drain location vs. '67
« Reply #1 on: August 15, 2016, 10:11:23 PM »
That's my understanding.  The trunk drop-off panels that were advertised for 65/66's were actually 67's; at least back in 2003 when I did the replacement on my 66.
Midlife Harness Restorations - http://midlifeharness.com

Offline J_Speegle

  • Administrator
  • Hero Member
  • *****
  • Posts: 24620
Re: '66 quarter panel drain location vs. '67
« Reply #2 on: August 17, 2016, 02:12:31 AM »
Am I correct that '66 quarter panel drains were on the bottom of the actual quarter panel, as opposed to the '67 having it mounted vertically, in the small square hole in the trunk drop off panel?

Yes and a common mistake when owners and shops start replacing panels with aftermarket. Sometimes you see two drains other times no drains   ::)
Jeff Speegle

Anything worth doing is worth doing concours ;)

Offline NEFaurora

  • Hero Member
  • *****
  • Posts: 970
Re: '66 quarter panel drain location vs. '67
« Reply #3 on: August 23, 2016, 09:46:23 PM »
Well, You can always drill the drain holes in the correct locations if they are not there!  ...Using a Step-Up Drill bit.  Works like a charm..

Someone replaced the rear drop-outs on my '65 vert, so that's what I had to do...  ;0)

:o)

Tony K.
Tony Kovar (NEFaurora@aol.com)
1965 Mustang Convertible 200 cid 3spd manual
1966 Mustang Convertible Sprint 200 C4 Auto
2007 Mustang Convertible V6 Auto with "Pony Package".
1966 Mustang Sprint 200 Registry Owner/Moderator
MCA#70001

Offline J_Speegle

  • Administrator
  • Hero Member
  • *****
  • Posts: 24620
Re: '66 quarter panel drain location vs. '67
« Reply #4 on: August 23, 2016, 10:44:29 PM »
Well, You can always drill the drain holes in the correct locations if they are not there!  ...Using a Step-Up Drill bit.  Works like a charm..

On a 65-66 would thought it would be tricky to cut the oval hole correctly as originally done. On a 67 the square hole is tough unless you can find a pretty small square punch

Jeff Speegle

Anything worth doing is worth doing concours ;)

Offline NEFaurora

  • Hero Member
  • *****
  • Posts: 970
Re: '66 quarter panel drain location vs. '67
« Reply #5 on: August 25, 2016, 01:38:22 PM »

Also, Don't forget the two other holes on the inner sides of the inner drop out panels....which are also on the both sides of the car..  Thought I think they are drains, They are more like access holes to clear out debris..

:o)

Tony K.
Tony Kovar (NEFaurora@aol.com)
1965 Mustang Convertible 200 cid 3spd manual
1966 Mustang Convertible Sprint 200 C4 Auto
2007 Mustang Convertible V6 Auto with "Pony Package".
1966 Mustang Sprint 200 Registry Owner/Moderator
MCA#70001

Offline Bob Gaines

  • Global Moderator
  • Hero Member
  • ****
  • Posts: 9355
Re: '66 quarter panel drain location vs. '67
« Reply #6 on: August 25, 2016, 04:40:33 PM »
Also, Don't forget the two other holes on the inner sides of the inner drop out panels....which are also on the both sides of the car..  Thought I think they are drains, They are more like access holes to clear out debris..

:o)

Tony K.
Or reverse light wiring.
Bob Gaines,Shelby enthusiast, Shelby collector , Shelby concours judge SAAC,MCA,Mid America Shelby

Offline J_Speegle

  • Administrator
  • Hero Member
  • *****
  • Posts: 24620
Re: '66 quarter panel drain location vs. '67
« Reply #7 on: August 25, 2016, 05:43:34 PM »
Also, Don't forget the two other holes on the inner sides of the inner drop out panels....which are also on the both sides of the car..  Thought I think they are drains, They are more like access holes to clear out debris..

Little high up on the inner trunk floor to be used as drains and small for cleaning out things.  Much easier to open the trunk ;)
Jeff Speegle

Anything worth doing is worth doing concours ;)