Author Topic: Best decal source Mustang early 1967 - SJ?  (Read 7289 times)

Offline Bob Gaines

  • Global Moderator
  • Hero Member
  • ****
  • Posts: 9369
Re: Best decal source Mustang early 1967 - SJ?
« Reply #30 on: April 05, 2016, 09:53:16 AM »
Jim, It's a 67 GT500. It's the first five digits of the VIN. 67400- No A/C, No thermactor, 67401- A/C, no thermactor. 67402- thermactor, 67403- thermactor and A/C.
To add- these are 4 speed . Auto has a different sequence.
Bob Gaines,Shelby enthusiast, Shelby collector , Shelby concours judge SAAC,MCA,Mid America Shelby

Offline jwc66k

  • Hero Member
  • *****
  • Posts: 7349
Re: Best decal source Mustang early 1967 - SJ?
« Reply #31 on: April 05, 2016, 02:36:51 PM »
Jim, It's a 67 GT500. It's the first five digits of the VIN. 67400- No A/C, No thermactor, 67401- A/C, no thermactor. 67402- thermactor, 67403- thermactor and A/C.
To add- these are 4 speed . Auto has a different sequence.
You guys with your foreign cars are something else -  ;)
Jim
I promise to be politically correct in all my posts to keep the BBBB from vociferating.

1967 eight barrel

  • Guest
Re: Best decal source Mustang early 1967 - SJ?
« Reply #32 on: April 05, 2016, 03:44:14 PM »
Just when we think we know something, we learn something new... Happens to all of us!
                                                                                                   -Keith
« Last Edit: April 05, 2016, 03:47:53 PM by 1967 eight barrel »

Offline Ralf

  • Hero Member
  • *****
  • Posts: 664
  • http://mustang-cabrio-67.jimdo.com/
Re: Best decal source Mustang early 1967 - SJ?
« Reply #33 on: June 15, 2016, 10:52:35 AM »
Thx to Keith sending me some decals  :)

- Battery OK
- Autolite Starter
- Tire Pressure

On the Tire Pressure Decal.
Will be placed on the back of the glovebox door, or inside the glovebox ?
Have seen both for early 67 San Jose.
Or even door driver side?
Some pictures available?

Thx Ralf
« Last Edit: June 15, 2016, 11:00:51 AM by Ralf »
1967 Convertible 289, C4 Automatic, Built Nov 30 1966, SJ, DSO75.

Offline J_Speegle

  • Administrator
  • Hero Member
  • *****
  • Posts: 24632
Re: Best decal source Mustang early 1967 - SJ?
« Reply #34 on: June 15, 2016, 04:33:44 PM »
On the Tire Pressure Decal.
Will be placed on the back of the glovebox door, or inside the glovebox ?
Have seen both for early 67 San Jose.

If it was on the back side of the glove box door it couldn't be seen due to the glove box liner that attaches over that surface. So inside the box on the plastic liner


Or even door driver side?

That's a new one ;) Though have seen one Dearborn car that had an old used in the door jamb but didn't seem to match the surroundings - may have been placed there by PO

As an additional note on the starter decal. Originally they were ink stamps not a decal and during 67 at least one supplier changed to stamping (in the metal) the information and doing away with the ink stamping all together
« Last Edit: June 15, 2016, 04:57:15 PM by J_Speegle »
Jeff Speegle

Anything worth doing is worth doing concours ;)

Offline Ralf

  • Hero Member
  • *****
  • Posts: 664
  • http://mustang-cabrio-67.jimdo.com/
Re: Best decal source Mustang early 1967 - SJ?
« Reply #35 on: June 16, 2016, 02:23:07 AM »
If it was on the back side of the glove box door it couldn't be seen due to the glove box liner that attaches over that surface. So inside the box on the plastic liner

Strange to me.
A tire pressure decal which couldn't be seen due to the glove box liner that attaches over that surface? What sense does it make?. Or do I misunderstand smth?

Like that than?

Its not a 67, but 68. However should be similar on 67, if you say inside the box on the plastic liner ?

Thx Ralf

1967 Convertible 289, C4 Automatic, Built Nov 30 1966, SJ, DSO75.