Topic: Part Number Identification.

[1967 eight barrel]

Does anyone have an application for this part number?  C7ZB-13875-A?
I'll explain when I have responses.

[preaction]

Switch assembly-horn blowing ?

[WT8095]

Are you sure it's not "C9ZB"?

[J_Speegle]

Couldn't find it in a MPC from the production period possibly a later service part.

[1967 eight barrel]

ECS has them as 1967 Shelby inboard lamp harness tags. I found nothing for them either.

[Bob Gaines]

ECS has them as 1967 Shelby inboard lamp harness tags. I found nothing for them either.

That harness was made up at SA specifically for the 67 Shelby. the tag would not be appropriate for a restoration that is meant to look like as delivered. If a tag was attached to a service harness (never seen one but maybe) it would most likely have a S7MS prefix since it is Shelby unique. This seems to be another incorrect tag for a 67 Shelby application. The first one you wrote about recently was a headlight harness.  This is highly unusual for ECS as they are typically very authentic.

[1967 eight barrel]

Bob,
I didn't use either tag. No tag on the individual inboards. I used the Red tag specific to headlamp harness that would be consistent with tach usage.

                                                                                                           -Keith

[Bob Gaines]

Bob,
I didn't use either tag. No tag on the individual inboards. I used the Red tag specific to headlamp harness that would be consistent with tach usage.

                                                                                                           -Keith

Glad to hear it. The vast majority of ECS tags are spot on.