« previous next »
Pages: [1]   Go Down

Author Topic: 1967 Rear Axle  (Read 1925 times)

Offline BKnapp

  • Full Member
  • ***
  • Posts: 237
1967 Rear Axle
« on: July 19, 2016, 01:34:48 AM »
Another newbie question. I was going through some pictures Pete Morgan took when checking out a car for me before I purchased it. First, the car has had a lot of work done to it, so I am still trying to figure out what is right and what is not. I came across this picture and believe I understand the tag info. I did see an earlier thread about the tag date (Dec 66) being so close to the cars build date (Jan 67)...this is close too. [My intake is 6M1 - is this reasonable for my build date?] My question is regarding the numbers that are cast into the axle housing. I have not been able to determine what these mean. Also wondering if this could be the original...any input is welcomed.
« Last Edit: July 19, 2016, 01:47:33 PM by BKnapp »
Logged
Bill

‘67 390 Coupe A/T  P/S  P/B. (Built 1/4/1967)  7R01S145xxx
‘67 390 FB A/T P/S P/B (Built 3/10/1967) 7F02S173xxx
2007 Shelby GT500 40th Anniv.  Convert. #125

Offline Josep

  • Sr. Member
  • ****
  • Posts: 441
Re: 1967 Rear Axle
« Reply #1 on: July 19, 2016, 03:45:09 AM »
Hi Bill,

I did a research for mine weeks ago. Here is some info.
WES-F for Mustangs between 67-70. 3.00 is the ratio. 9 is diameter of the ring. 28 Splines
Date built id 6MC that is 1966 December 3rd week.
The rest of info in pics attached.
See that all matches with your axle.

Good luck,

Josep
Logged
1966 Mustang Hardtop 200 Inline 6 - Arcadian Blue - C4 - Thermactor - 6R07T213966 - San Jose projected build date June 11th 1966 - DSO 71
1966 Mustang Convertible 289-2V - Vintage Burgundy - AT PS DB - 6F08C109403 - Dearborn projected build date September 9th 1965 - DSO 36

Offline tobkob

  • Sr. Member
  • ****
  • Posts: 472
Re: 1967 Rear Axle
« Reply #2 on: July 19, 2016, 10:06:59 AM »
I noticed the tag is on the opposite side.

TOB
Logged
1969 (04/07/69) GT350 owned since 1970. Only owner since Hertz.

Offline BKnapp

  • Full Member
  • ***
  • Posts: 237
Re: 1967 Rear Axle
« Reply #3 on: July 19, 2016, 01:42:49 PM »
Thanks Josep & TOB - I was able to decipher the tag. I was more interested in the number cast into the housing cover....it appears to be "015  52" or "DIF  52". I am not sure what that means?

I will look further into the placement of the tag when I take it apart and rebuild it. I believe the illustration is just that...an illustration. I will be looking for real examples.

Thanks
Logged
Bill

‘67 390 Coupe A/T  P/S  P/B. (Built 1/4/1967)  7R01S145xxx
‘67 390 FB A/T P/S P/B (Built 3/10/1967) 7F02S173xxx
2007 Shelby GT500 40th Anniv.  Convert. #125

Offline Josep

  • Sr. Member
  • ****
  • Posts: 441
Re: 1967 Rear Axle
« Reply #4 on: July 19, 2016, 01:55:36 PM »
Oh! yes Bill, DIF 52 looks to me. Sorry I have no info about that.


Josep
Logged
1966 Mustang Hardtop 200 Inline 6 - Arcadian Blue - C4 - Thermactor - 6R07T213966 - San Jose projected build date June 11th 1966 - DSO 71
1966 Mustang Convertible 289-2V - Vintage Burgundy - AT PS DB - 6F08C109403 - Dearborn projected build date September 9th 1965 - DSO 36

Offline carlite65

  • Global Moderator
  • Hero Member
  • ****
  • Posts: 2411
Re: 1967 Rear Axle
« Reply #5 on: July 19, 2016, 02:06:29 PM »
that may be a foundry mold number.
Logged
5F09C331248

Offline J_Speegle

  • Administrator
  • Hero Member
  • *****
  • Posts: 24628
Re: 1967 Rear Axle
« Reply #6 on: July 19, 2016, 02:28:28 PM »
Quote from: carlite65 on July 19, 2016, 02:06:29 PM
that may be a foundry mold number.

Good guess +1

Not sure if there should be any importance placed on such markings but that's up to the individual.
Logged
Jeff Speegle

Anything worth doing is worth doing concours ;)

Offline BKnapp

  • Full Member
  • ***
  • Posts: 237
Re: 1967 Rear Axle
« Reply #7 on: July 19, 2016, 02:50:56 PM »
Thanks guys...I had no idea if it was anything "meaningful" or identifying. I would guess the tag is original, but have no way to verify. It is consistent with my axle and date appears acceptable for my cars build date.
Logged
Bill

‘67 390 Coupe A/T  P/S  P/B. (Built 1/4/1967)  7R01S145xxx
‘67 390 FB A/T P/S P/B (Built 3/10/1967) 7F02S173xxx
2007 Shelby GT500 40th Anniv.  Convert. #125

Offline 67350#1242

  • Sr. Member
  • ****
  • Posts: 313
Re: 1967 Rear Axle
« Reply #8 on: July 19, 2016, 03:23:32 PM »
I believe DIF is Dearborn Iron Foundry - Fords River Rouge plant. 
« Last Edit: July 19, 2016, 05:00:59 PM by 67350#1242 »
Logged
67 Coupe SJ 11/16/66
67 GT350 SJ 2/01/67
Pages: [1]   Go Up
« previous next »