Author Topic: Non folding seat question  (Read 766 times)

Offline Munypit

  • Newbie
  • *
  • Posts: 24
Non folding seat question
« on: October 19, 2024, 12:59:59 PM »
I have a November 68 Metuchen built Mach 1 with fixed rear seat.  My question is which way does the cap bar face that goes on top of the seat back?  The cap is angled, so does the downward angle face towards the front or towards the rear of the car?
69 Mach 1 351W with A/C FMX built 11/68 at Metuchen

Offline Armond

  • Silver Level Subscriber
  • Sr. Member
  • ****
  • Posts: 421
    • D'Agostini Restorations.com
Re: Non folding seat question
« Reply #1 on: October 21, 2024, 01:04:53 AM »
I have done a few of these and I am pretty sure the short side goes rearward.  Good luck!
MCA#31064
rsz_1rsz_thumbnail_1_altered" border="0

Offline Munypit

  • Newbie
  • *
  • Posts: 24
Re: Non folding seat question
« Reply #2 on: October 21, 2024, 10:45:03 AM »
Thanks
69 Mach 1 351W with A/C FMX built 11/68 at Metuchen

Offline Bossbill

  • Hero Member
  • *****
  • Posts: 3283
  • In the middle of project hell
Re: Non folding seat question
« Reply #3 on: October 23, 2024, 01:40:34 PM »
I believe 69 and 70 are the same and my 70 has the angled piece to the rear of the car.
Bill
Concours  Actual Ford Build 3/2/67 GT350 01375
Driven      6/6/70 0T02G160xxx Boss 302
Modified   5/18/65 5F09A728xxx Boss 347 Terminator-X 8-Stack
Race        65 2+2 Coupe conversion