Author Topic: OEm Rally Pac  (Read 966 times)

Offline gcdunlap

  • Newbie
  • *
  • Posts: 8
OEm Rally Pac
« on: June 14, 2015, 07:38:29 PM »
Hi All:

I have a chance to pick up a Rally Pac for my 65 ... but not sure this is an original. Any thoughts?
5F09C Caspian Blue Fastback
Indianapolis

Offline J_Speegle

  • Administrator
  • Hero Member
  • *****
  • Posts: 24630
Re: OEm Rally Pac
« Reply #1 on: June 14, 2015, 08:09:09 PM »
All the wires the same color?

Any writing/printing on the back of the gauges?
Jeff Speegle

Anything worth doing is worth doing concours ;)

Offline jwc66k

  • Hero Member
  • *****
  • Posts: 7347
Re: OEm Rally Pac
« Reply #2 on: June 14, 2015, 08:42:05 PM »
The original Rally Pac had two taped cables from the back:
The clock harness - blue-red (lights), black (power - should have a male bullet), black (ground - should have a ring lug).
The tach harness - blue-red (lights, attaches to the blue-red above), black (goes to the resistance wire to the coil), red (to ignition switch).
There is a feed harness that goes under the dash. It's available, NPD - 10B943-1D, $24.95, and others.
Jim
I promise to be politically correct in all my posts to keep the BBBB from vociferating.