Author Topic: Distributor for 66 SJ built Mustang w/smog  (Read 2135 times)

Offline MyRed66GT

  • Full Member
  • ***
  • Posts: 102
Distributor for 66 SJ built Mustang w/smog
« on: December 04, 2009, 09:25:42 PM »
After some research I have come to realize 66 cars that had smog systems had a different distributor than cars without smog. Can anyone shed some light on what I am looking for re: part #'s and differences between a standard distributor and a smog distributor? Thanks in advance.

Offline midlife

  • Wiring Guru---let me check your shorts!
  • Global Moderator
  • Hero Member
  • ****
  • Posts: 2176
    • Midlife Harness Restorations
Re: Distributor for 66 SJ built Mustang w/smog
« Reply #1 on: December 04, 2009, 10:09:39 PM »
Bob Mannel's book (Mustang and Ford Small Block V8) has an excellent section on all the distributors, their numbers, and their characteristics.  This is a fantastic reference book, and worth every penny!
Midlife Harness Restorations - http://midlifeharness.com

Offline J_Speegle

  • Administrator
  • Hero Member
  • *****
  • Posts: 24628
Re: Distributor for 66 SJ built Mustang w/smog
« Reply #2 on: December 05, 2009, 12:59:30 AM »
asking about a 289 or 6cyl?

IF 289 2V or 4V?

Basic difference (if I recall correctly) will be the calibration, when and how much advance is figured in
Jeff Speegle

Anything worth doing is worth doing concours ;)

Offline MyRed66GT

  • Full Member
  • ***
  • Posts: 102
Re: Distributor for 66 SJ built Mustang w/smog
« Reply #3 on: December 05, 2009, 11:59:51 AM »
289 4V

Offline J_Speegle

  • Administrator
  • Hero Member
  • *****
  • Posts: 24628
Re: Distributor for 66 SJ built Mustang w/smog
« Reply #4 on: December 06, 2009, 12:17:37 AM »
289 4V

C6ZF-12127-M with manual trans
C6ZF-12127-A with automatic trans

If I remember correctly small pale yellow paint daub (commonly sprayed) on the rear outer part (just below the cap location) of the housing
Jeff Speegle

Anything worth doing is worth doing concours ;)