61
1967 Mustang / Re: trans dipstick tube
« Last post by Keith Stem on March 25, 2025, 09:11:25 AM »Black is the correct color, the replacements after 68 were yellow, the handle is a dark bare metal.
News:
Join us on Facebook: Search for 'ConcoursMustang' Private group!
https://www.facebook.com/groups/concoursmustang/
SAAC-50 , Sonoma, CA August 21-24, 2025
http://www.saac.com/
Recent Posts
Black is the correct color, the replacements after 68 were yellow, the handle is a dark bare metal.
62
1967 Mustang / Trans Dipstick Tube - S Code Automatic
« Last post by Ashley on March 25, 2025, 08:48:44 AM » Trans dipstick tube for 67 SJ S Code C6 has semi-gloss or gloss black paint, is this correct. Also is dipstick bare metal at handle. does tube or dipstick get a paint daub. Thanks
63
Parts / Re: Wheel ID
« Last post by sidewinder427 on March 25, 2025, 04:24:55 AM »They should be 5 on 4.5" came from an early Mustang. So they can originate from a AMC or Mopar even if they are stamped by Ford with their logo?
Anyway, you don?t think they are from a GT-350H?
Anyway, you don?t think they are from a GT-350H?
64
1964 1/2 - 1965 / Re: 65 Fastback Trunk Measurement
« Last post by Armond on March 25, 2025, 03:02:56 AM »Thank you!
65
Body, Paint & Sealers / Re: Where to buy Posidriv Screws
« Last post by ruppstang on March 25, 2025, 12:36:03 AM »I think a longer posi drive screw of that size was used in the seat back lock block. Just a thought.
66
Body, Paint & Sealers / Where to buy Posidriv Screws
« Last post by DaveF on March 25, 2025, 12:32:40 AM »To get my door striker to engage the door latch at the correct depth, we needed to add a shim to the back of the striker. Now, my standard 5/16-18 x 3/4" Posidriv screws are a little too short to thread in properly. My question is; is there anyplace to buy some 1" Posidriv screws? I have tried MSC as well as Grainger. While they both carry Posidriv, their inventory contains only metric threads. I can't find anywhere that sells them in Imperial sizes.
67
1969 Mustang / Re: Pull cup installation on Reproduction door panels
« Last post by Bossbill on March 24, 2025, 10:01:19 PM »The MM panel I just inspected was for a 70. I understand the 69 cup is a different size but should attach the same way.
The backboard is plastic not fiberboard
The backboard is plastic not fiberboard
68
Wanted Ads / Re: 1970 ps clip
« Last post by J_Speegle on March 24, 2025, 08:49:56 PM »The conversation about the clip and applications were split and that discussion continues in the link below
https://www.concoursmustang.com/forum/index.php?topic=30665.0
https://www.concoursmustang.com/forum/index.php?topic=30665.0
69
Wanted Ads / Re: 1970 ps clip
« Last post by jwc66k on March 24, 2025, 08:40:18 PM »Take a good look at my picture. Note the "off-set" two sets of clamps. Is that what you want? Yours appear to be not "off-set". Mine are 11/16 and 7/16 inch. The drawing is not that clear.
Jim
Jim
70
1964 1/2 - 1965 / Re: 65 Fastback Trunk Measurement
« Last post by Bossbill on March 24, 2025, 08:04:25 PM »You bet.
Oh, I should note I was using a tape with an L on the end. Be sure to use a similar contractor tape measure.
Oh, I should note I was using a tape with an L on the end. Be sure to use a similar contractor tape measure.