ConcoursMustang Forums

Restoring - General discussions that span across many different groups of years and models => Parts => Topic started by: C5ZZKGT on October 10, 2011, 02:58:54 PM

Title: Help with flywheel ID??
Post by: C5ZZKGT on October 10, 2011, 02:58:54 PM

C30E-8380-B dated 4H25     Thanks!

Title: Re: Help with flywheel ID??
Post by: midlife on October 10, 2011, 09:44:58 PM

Something's not right...the flywheel base number is 6375.  8380 is somehow related to cooling/radiator, and my MPC doesn't list an 8380 number.

Title: Re: Help with flywheel ID??
Post by: C5ZZKGT on October 11, 2011, 07:09:57 AM

Thanks Randy, I'll check the numbers again.

Title: Re: Help with flywheel ID??
Post by: JKWilson on October 11, 2011, 10:10:30 AM

6375 would be in the part number but 6380 would be the casting number. A C30E-6380-B casting number is for a manual tranny small block, 157 tooth ring gear flywheel.

Title: Re: Help with flywheel ID??
Post by: C5ZZKGT on October 12, 2011, 07:56:53 AM

Thanks JK for clairifying. Is there any way to distinguish if this is a Hipo flywheel?

Title: Re: Help with flywheel ID??
Post by: CharlesTurner on October 12, 2011, 09:15:22 AM

Quote from: C5ZZKGT on October 12, 2011, 07:56:53 AM

Thanks JK for clairifying. Is there any way to distinguish if this is a Hipo flywheel?

There was a bunch of info on this on the old hi-po forum.  If I remember right, the balance of the flywheel is different on a K code, but they carry the same casting number.  Sometimes there will be an orange paint splash on the hi-po flywheels.

Title: Re: Help with flywheel ID??
Post by: C5ZZKGT on October 12, 2011, 02:10:54 PM

You know Charles you are right-I'd seen something about that on the Hipo forum as well, I'm going to look in the Hipo book and see if there is any info there.

Title: Re: Help with flywheel ID??
Post by: cobraboy on October 12, 2011, 06:29:37 PM

Quote from: C5ZZKGT on October 10, 2011, 02:58:54 PM

C30E-8380-B dated 4H25     Thanks!

Hi I have all the info on the HiPo site about flywheels saved. But I cannot send you a PM thru this site, and my email provider has scrambled my contacts so I cannot send you an email.
I know you have my email, so send me a message and I will email you the file. Or a PM if you have lost my contact
Cheers
Mark

Title: Re: Help with flywheel ID??
Post by: C5ZZKGT on October 12, 2011, 07:01:27 PM

Quote from: cobraboy on October 12, 2011, 06:29:37 PM

Hi I have all the info on the HiPo site about flywheels saved. But I cannot send you a PM thru this site, and my email provider has scrambled my contacts so I cannot send you an email.
I know you have my email, so send me a message and I will email you the file. Or a PM if you have lost my contact
Cheers
Mark

Mark, PM sent, Thanks!

Title: Re: Help with flywheel ID??
Post by: JKWilson on October 13, 2011, 01:44:58 AM

Tony I got the basic casting number info off of the Mustang Tek website. I didn't have any other info readily available.